Zyvpee
Zyvpee AFB0612HB 60×60×15 mm 12 V 0.15 A 3-wire 2 Ball case fan
A 60 mm square DC cooler with dual ball bearings running at 1600 to 1999 RPM on 12 V 0.15 A via a three-wire connector
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- RPM1600-1999 RPM
- Power Connector3 Wires
- ColorBlack
- Dual ball bearings extend service life
- 12 V 0.15 A draw keeps power use low
- 3-wire connector enables RPM monitoring
- 60×60×15 mm fits tight case spaces
- 1600–1999 RPM range suits focused cooling
Zyvpee AFB0612HB 12 V DC case fan
The Zyvpee AFB0612HB is a 60 by 60 by 15 millimetre case fan built for standard chassis ventilation. It runs on 12 volts with a 0.15 amp draw and uses a three-wire power connector for speed monitoring. The two-ball bearing design supports continuous operation in tight spaces.
Suited for compact builds and replacement cooling
This fan suits builders refreshing a small-form-factor case or swapping a worn 60 millimetre cooler on legacy hardware. The non-LED black frame keeps the look neutral for office or server environments. Buyers needing higher airflow, PWM control or larger frame sizes should look at other models.
1600 to 1999 RPM speed range defines airflow
The 1600 to 1999 RPM range sets the cooling capacity for this 60 millimetre frame. Match this speed band to the thermal load of the component you are cooling. If the target device demands significantly more or less air movement, a different fan specification is required.
Fordele
- Dual ball bearings extend service life
- 12 V 0.15 A draw keeps power use low
- 3-wire connector enables RPM monitoring
- 60×60×15 mm fits tight case spaces
- 1600–1999 RPM range suits focused cooling
Specifikationer
| Series | AFB0612HB |
|---|---|
| Model | AFB0612HB |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| RPM | 1600-1999 RPM |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*15mm |
Spørgsmål om denne vare
Will this 60 mm by 60 mm by 15 mm fan fit my case's 60 mm mounting holes?
Yes, the fan measures exactly 60 mm square and 15 mm thick, matching standard 60 mm case mounts with four corner screw holes.
How do I connect the three wires to my motherboard and which lead is which?
Plug the 3-wire connector onto a 12 V 3-pin fan header; the three leads are power, ground and tachometer signal.
When should I expect to replace the 2 Ball bearing in this AFB0612HB fan?
The dual ball bearing is rated for long life at 1600–1999 RPM; replace the fan if noise increases or speed drops noticeably.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



