Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black square 80 mm case fan with 3-pin connector and ball bearing

Zyvpee

Zyvpee AFB0812SHD 80×20 mm 12 V 0.33 A 3-pin ball-bearing case fan

SKU CH-9CJJ-GFQE3

80 mm ball-bearing case fan moves 40-45 CFM at 3500-3999 RPM with 35-40 dBA noise on a 12 V 3-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM3500-3999 RPM
  • Air Flow40-45 CFM
  • Noise Level35 - 40 dBA
  • Ball bearing reduces wear for longer service life
  • 40-45 CFM airflow moves heat from tight chassis spaces
  • 35-40 dBA noise level keeps system acoustics low
  • 12 V 0.33 A draw fits standard motherboard headers
  • 80×20 mm frame suits compact case fan mounts

Compact 80 mm case fan for tight builds

The Zyvpee AFB0812SHD fits 80 mm mounting points and runs on 12 V DC with a 0.33 A draw. Its 3-pin connector supplies power and tachometer feedback to standard motherboard headers. The square 20 mm frame suits slim chassis or side-panel locations where larger fans cannot fit.

Ball-bearing motor and simple wiring

A ball bearing supports the rotor for consistent rotation across the 3500-3999 RPM range. The three-wire lead carries power, ground and speed signal without PWM control. Black plastic blades and frame blend into most builds and the fan ships without LED lighting.

Measured airflow and acoustics

At full speed the fan moves 40-45 CFM while producing 35-40 dBA of noise. Power consumption stays at 12 V × 0.33 A, so the load on a motherboard header or fan controller remains modest. The DC square cooler design targets directed airflow through heatsinks or restricted vents.

Fordele

  • Ball bearing reduces wear for longer service life
  • 40-45 CFM airflow moves heat from tight chassis spaces
  • 35-40 dBA noise level keeps system acoustics low
  • 12 V 0.33 A draw fits standard motherboard headers
  • 80×20 mm frame suits compact case fan mounts

Specifikationer

SeriesAFB0812SHD
ModelAFB0812SHD
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM3500-3999 RPM
Air Flow40-45 CFM
Noise Level35 - 40 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*20mm

Spørgsmål om denne vare

Does the 3-pin connector limit the AFB0812SHD to fixed-speed operation at 12 V?

The 3-pin DC connector runs the fan at full 12 V, so speed stays in the 3500-3999 RPM range; PWM control is not supported.

What clearance does the 80×20 mm frame need inside the case?

The square frame is 80 mm on each side and 20 mm thick; allow at least 20 mm depth behind the mounting surface.

How is the AFB0812SHD mounted, and which step is often missed?

Four corner screws through the 80 mm frame; the step often missed is orienting the airflow arrow toward the interior before tightening.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.