Zyvpee
Zyvpee FBA06T24H 60x15mm 24V 0.11A 3-wire case fan
A 60 x 15 mm case fan running at up to 1600 RPM on 24 V with a three-wire ball-bearing motor
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector3 wires
- ColorBlack
- Compact 60×15 mm footprint fits tight chassis
- Ball-bearing design sustains reliable airflow up to 1600 RPM
- 24 V 0.11 A draw keeps power budget low
- Three-wire connector enables speed monitoring
- Inverter-rated cooling targets CPU-cooler applications
Zyvpee 60x15mm 24V case fan
This Zyvpee FBA06T24H is a 60 by 15 millimetre case fan that runs on 24 volts and draws 0.11 amps through a three-wire connector. It uses a ball bearing and spins below 1600 RPM. The frame is black with no LED lighting and is marketed as an inverter cooler compatible with CPU coolers.
Suits 24V three-wire headers only
Builders whose motherboard or controller supplies a 24 volt three-wire header can use this fan directly. It is not for systems that lack a 24 volt three-wire header, nor for builds that require a larger frame or a four-wire PWM interface.
24V 0.11A three-wire power spec
The single specification that decides fit is the 24 volt 0.11 amp three-wire power requirement. If the header cannot deliver 24 volts at that current through three wires, the fan will not operate correctly.
Fordele
- Compact 60×15 mm footprint fits tight chassis
- Ball-bearing design sustains reliable airflow up to 1600 RPM
- 24 V 0.11 A draw keeps power budget low
- Three-wire connector enables speed monitoring
- Inverter-rated cooling targets CPU-cooler applications
Specifikationer
| Brand | Zyvpee |
|---|---|
| Series | FBA06T24H |
| Model | FBA06T24H |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 3 wires |
| Color | Black |
| LED | Non-LED |
| Features | inverter cooler |
| Dimensions | 60*15mm |
Spørgsmål om denne vare
How can I verify the fan is running correctly after installation?
Check that the blades spin smoothly and the tachometer signal reports a speed below 1600 RPM when powered at 24V.
What comes in the box and what must I purchase separately?
The package contains the 60x15mm ball-bearing fan with a 3-wire lead; mounting screws and a 24V power source are not included.
Which version should I choose for a 24V CPU cooler slot?
Select the FBA06T24H model rated at 24V 0.11A, 60x15mm, with a 3-wire connector to match the cooler header.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001036BTC
På lager