Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Small black 40 by 20 mm case fan with three wires and maglev bearing

Zyvpee

Zyvpee GM2404PKVX-A 40mm 24 Vdc 1.7w 3 Pin Maglev case fan

SKU CH-0JT5-BCPQV

A 40 mm Maglev case fan running at up to 1600 RPM on 24 VDC with a 3-pin connector

  • TypeCase Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing enables quiet operation below 1600 RPM
  • 24 Vdc 1.7 W design delivers efficient cooling power
  • Compact 40 x 20 mm frame fits tight spaces
  • Three-pin connector simplifies motherboard or controller installation
  • Non-LED black finish suits stealth system builds

Compact 40 mm case fan for 24 V systems

The Zyvpee GM2404PKVX-A is a 40 mm square frame fan designed for 24 Vdc operation. Maglev bearing and a rated speed below 1600 RPM keep noise low in tight enclosures. The three-pin power connector supplies tachometer feedback for monitoring. It suits small-form-factor chassis, network gear or industrial inverter cooling where a 24 V rail is present.

Verify voltage rail and connector before ordering

Confirm that your board or controller provides a 24 Vdc header with a three-pin layout matching the fan wires. The unit draws 1.7 W at full speed, so the supply must deliver adequate current on the 24 V line. Physical clearance is 40 mm by 20 mm; ensure the mounting holes align with your device. No PWM control is mentioned, so speed regulation depends on voltage adjustment.

Bare fan without extra cables or mounting hardware

The package contains only the fan as shown in the supplier photographs. No screws, vibration pads, adapters or extension cables are included. Software utilities or RGB controllers are not supplied because the model lacks LED lighting. Buyers needing mounting kits or alternative connectors must source them separately.

Fordele

  • Maglev bearing enables quiet operation below 1600 RPM
  • 24 Vdc 1.7 W design delivers efficient cooling power
  • Compact 40 x 20 mm frame fits tight spaces
  • Three-pin connector simplifies motherboard or controller installation
  • Non-LED black finish suits stealth system builds

Specifikationer

BrandZyvpee
SeriesGM2404
ModelGM2404PKVX-A
TypeCase Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Featurescpu fan
Dimensions40*20mm
Package Contentsrefer to title

Spørgsmål om denne vare

What comes in the box with the Zyvpee GM2404PKVX-A and do I need to buy a power cable separately?

The fan is supplied as shown in the title and photos. It has a 3-pin connector wired for 24 Vdc so no extra cable is needed if your header matches.

The title lists GM2404PKVX-A — are there other versions or capacities I should consider?

This listing covers the single GM2404PKVX-A model rated at 24 Vdc, 1.7 W and under 1600 RPM. No alternative speeds or voltages are offered here.

What does the sub-1600 RPM figure mean once the fan is installed in a case?

At full voltage the fan spins below 1600 RPM, delivering quiet airflow for tight 40 mm spaces such as router or inverter cooling.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.