Zyvpee
Zyvpee KD2406PTB1 6025 DC 24V 1.9W 4000RPM case fan
A 60 × 60 × 25 mm DC blower fan spins at 4000 RPM using 1.9 W at 24 V with dual ball bearings and a two-wire lead
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 wires
- ColorBlack
- LEDNon-LED
- High airflow with 4000 RPM blower design
- Efficient cooling at 1.9W power draw
- Reliable double ball bearing for long life
- Compact 60×60×25 mm fits tight spaces
- Simple 2-wire 24V DC connection
Zyvpee KD2406PTB1 6025 DC 24V case fan
The Zyvpee KD2406PTB1 is a 60 mm by 60 mm by 25 mm square case fan that runs on 24 V DC power and spins at 4000 RPM. It draws 1.9 W through a two-wire connector and uses double ball bearings for continuous operation. The black non-LED frame fits standard 6025 mounting points in compatible chassis.
Suits 24 V DC builds needing a compact blower
Builders working with a 24 V DC supply and a 6025 cut-out can install this fan directly. Systems that require a PWM or three-wire header for speed control cannot use the two-wire design. Buyers who need a larger frame, a lower voltage or integrated lighting should look at other models.
Two-wire 24 V DC power connector
The fan terminates in a simple two-wire lead that delivers fixed 24 V DC power without a tachometer or PWM signal. This connector type decides whether the unit fits the target system’s fan header and control scheme.
Fordele
- High airflow with 4000 RPM blower design
- Efficient cooling at 1.9W power draw
- Reliable double ball bearing for long life
- Compact 60×60×25 mm fits tight spaces
- Simple 2-wire 24V DC connection
Specifikationer
| Series | KD2406PTB1 |
|---|---|
| Model | KD2406PTB1 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*25mm |
Spørgsmål om denne vare
How does the 4000 RPM motor hold up when the fan runs continuously at 24 V?
The double ball bearing is rated for long life under constant rotation, and the 1.9 W draw stays steady without thermal throttling.
What noise and heat levels should I expect after hours of 4000 RPM operation?
At 4000 RPM the blower produces a noticeable but consistent airflow sound; the 1.9 W power draw keeps motor heat low even in a 60×60×25 mm frame.
What connector or voltage source must my system already provide for this 24 V fan?
Your chassis or controller needs a 24 V DC output and a two-wire header to match the fan's power leads.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



