Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 60 by 25 mm DC axial fan with three-pin connector

Zyvpee

Zyvpee PMD1206PTB1-A 60mm 3 Pin 12V 3.9W Ball Bearing Case Fan

SKU CH-VAGG-ZEYPD

A 60 mm ball-bearing case fan running at 2000-2499 RPM with a 3-pin 12 V connector for CPU cooler mounting

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM2000-2499 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Ball bearing ensures long-lasting reliable operation
  • 12 V 3.9 W draws modest power from the header
  • 60 mm by 25 mm fits tight CPU cooler spaces
  • 3 pin connector enables motherboard speed control
  • 2000 to 2499 RPM delivers strong focused airflow

60 mm Ball-Bearing Case Fan

The Zyvpee PMD1206PTB1-A is a 12 V DC axial fan built for CPU cooler and chassis ventilation. Its 60 mm frame and 25 mm thickness fit standard mounting points in compact builds. The three-pin connector provides direct voltage control for straightforward integration. It targets builders who need a small, reliable airflow mover without lighting.

3.9 W at 2000-2499 RPM

At 3.9 W the fan spins between 2000 and 2499 RPM, delivering focused airflow for heatsinks or tight case sections. The ball bearing supports continuous operation at this speed range with reduced wear. It runs out of headroom when larger radiators or high-static-pressure arrays are required. The fixed voltage design limits low-speed tuning compared to PWM alternatives.

Three-Pin Power Connector Only

The bundle consists solely of the fan unit with its attached three-wire lead. No mounting screws, adapters or speed controllers are included in the package. The connector plugs directly into a motherboard header or fan hub for immediate power. Buyers needing PWM control or rubber anti-vibration mounts must source those separately.

Fordele

  • Ball bearing ensures long-lasting reliable operation
  • 12 V 3.9 W draws modest power from the header
  • 60 mm by 25 mm fits tight CPU cooler spaces
  • 3 pin connector enables motherboard speed control
  • 2000 to 2499 RPM delivers strong focused airflow

Specifikationer

BrandZyvpee
SeriesPMD1206
ModelPMD1206PTB1-A
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM2000-2499 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60 * 25mm
Package Contentsrefer to title

Spørgsmål om denne vare

Will this 60 mm fan fit the 3-pin header on my older motherboard?

Yes, it uses a standard 3-pin connector that plugs directly into legacy 3-pin fan headers on older boards.

How can I verify the fan is spinning at the correct speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report between 2000 and 2499 RPM under load.

Does the package include mounting screws or do I need to buy them separately?

The box contains only the fan unit; mounting screws are not included and must be sourced separately.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.