BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
A-Tech
16GB DDR4 2666MHz ECC registered DIMM adds 1Rx4 server memory with 1.2V operation and CL19 latency
This 16GB DDR4 2666MHz ECC RDIMM module uses a registered design with 1Rx4 organisation and CL19 latency. It operates at the standard 1.20V DDR4 voltage and fits 288-pin DIMM slots. The module targets servers and workstations that require error-correcting registered memory for stable operation.
The module serves as a compatible equivalent for HP part numbers 815098-S21, 850880-001 and 872837-091. It upgrades systems originally configured with lower-capacity or slower DDR4 registered DIMMs. The jump is worth it when the platform supports 2666MHz registered ECC memory and the workload demands higher single-module density.
Registered DIMMs require a memory controller that supports buffered operation and cannot be mixed with unbuffered modules in the same channel. The DDR4 2666MHz speed ceiling is set by the platform's memory controller; faster modules will downclock to the highest supported rate. Buyers needing non-ECC or unbuffered memory for desktop platforms cannot use this module.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes — the module uses the standard DDR4 DIMM 288-pin form factor that matches the slots in HP systems designed for 815098-S21, 850880-001 or 872837-091 memory.
Install the DIMM with the server powered off; most HP platforms auto-detect the 2666 MHz CL19 1.20 V registered ECC timings, but verify the memory mode in BIOS if the system does not show the full 16 GB.
The module is rated for continuous server operation at 1.2 V DDR4 standard voltage; plan replacement only if diagnostics report correctable ECC errors rising or the system fails memory tests.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;