BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
16GB DDR4 2666MHz ECC registered DIMM adds 1Rx4 server memory with 1.2V operation and CL19 latency
This 16GB DDR4 2666MHz ECC RDIMM module uses a registered design with 1Rx4 organisation and CL19 latency. It operates at the standard 1.20V DDR4 voltage and fits 288-pin DIMM slots. The module targets servers and workstations that require error-correcting registered memory for stable operation.
The module serves as a compatible equivalent for HP part numbers 815098-S21, 850880-001 and 872837-091. It upgrades systems originally configured with lower-capacity or slower DDR4 registered DIMMs. The jump is worth it when the platform supports 2666MHz registered ECC memory and the workload demands higher single-module density.
Registered DIMMs require a memory controller that supports buffered operation and cannot be mixed with unbuffered modules in the same channel. The DDR4 2666MHz speed ceiling is set by the platform's memory controller; faster modules will downclock to the highest supported rate. Buyers needing non-ECC or unbuffered memory for desktop platforms cannot use this module.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes — the module uses the standard DDR4 DIMM 288-pin form factor that matches the slots in HP systems designed for 815098-S21, 850880-001 or 872837-091 memory.
Install the DIMM with the server powered off; most HP platforms auto-detect the 2666 MHz CL19 1.20 V registered ECC timings, but verify the memory mode in BIOS if the system does not show the full 16 GB.
The module is rated for continuous server operation at 1.2 V DDR4 standard voltage; plan replacement only if diagnostics report correctable ECC errors rising or the system fails memory tests.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?