BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16GB DDR4 2666MHz ECC registered DIMM adds 1Rx4 server memory with 1.2V operation and CL19 latency
This 16GB DDR4 2666MHz ECC RDIMM module uses a registered design with 1Rx4 organisation and CL19 latency. It operates at the standard 1.20V DDR4 voltage and fits 288-pin DIMM slots. The module targets servers and workstations that require error-correcting registered memory for stable operation.
The module serves as a compatible equivalent for HP part numbers 815098-S21, 850880-001 and 872837-091. It upgrades systems originally configured with lower-capacity or slower DDR4 registered DIMMs. The jump is worth it when the platform supports 2666MHz registered ECC memory and the workload demands higher single-module density.
Registered DIMMs require a memory controller that supports buffered operation and cannot be mixed with unbuffered modules in the same channel. The DDR4 2666MHz speed ceiling is set by the platform's memory controller; faster modules will downclock to the highest supported rate. Buyers needing non-ECC or unbuffered memory for desktop platforms cannot use this module.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes — the module uses the standard DDR4 DIMM 288-pin form factor that matches the slots in HP systems designed for 815098-S21, 850880-001 or 872837-091 memory.
Install the DIMM with the server powered off; most HP platforms auto-detect the 2666 MHz CL19 1.20 V registered ECC timings, but verify the memory mode in BIOS if the system does not show the full 16 GB.
The module is rated for continuous server operation at 1.2 V DDR4 standard voltage; plan replacement only if diagnostics report correctable ECC errors rising or the system fails memory tests.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?