BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278589BTC
Na zalogi
A-Tech
A-Tech 16GB DDR4 2666MHz ECC RDIMM 1Rx4 for HP 815098-S21 850880-001 872837-091 Server Memory
16GB DDR4 2666MHz ECC registered DIMM adds 1Rx4 server memory with 1.2V operation and CL19 latency
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16GB DDR4 2666MHz ECC RDIMM boosts server capacity
- CL19 1.20V registered DIMM cuts power draw
- 1Rx4 288-pin layout fits HP 815098-S21 850880-001 872837-091
- Major-brand chips tested for dependable uptime
- Lifetime warranty with US-based tech support included
16GB DDR4 2666MHz ECC RDIMM
This 16GB DDR4 2666MHz ECC RDIMM module uses a registered design with 1Rx4 organisation and CL19 latency. It operates at the standard 1.20V DDR4 voltage and fits 288-pin DIMM slots. The module targets servers and workstations that require error-correcting registered memory for stable operation.
Replaces HP 815098-S21 850880-001 872837-091
The module serves as a compatible equivalent for HP part numbers 815098-S21, 850880-001 and 872837-091. It upgrades systems originally configured with lower-capacity or slower DDR4 registered DIMMs. The jump is worth it when the platform supports 2666MHz registered ECC memory and the workload demands higher single-module density.
DDR4 registered DIMM constraints
Registered DIMMs require a memory controller that supports buffered operation and cannot be mixed with unbuffered modules in the same channel. The DDR4 2666MHz speed ceiling is set by the platform's memory controller; faster modules will downclock to the highest supported rate. Buyers needing non-ECC or unbuffered memory for desktop platforms cannot use this module.
Poudarki
- 16GB DDR4 2666MHz ECC RDIMM boosts server capacity
- CL19 1.20V registered DIMM cuts power draw
- 1Rx4 288-pin layout fits HP 815098-S21 850880-001 872837-091
- Major-brand chips tested for dependable uptime
- Lifetime warranty with US-based tech support included
Specifikacije
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Vprašanja o tem izdelku
Will this 288-pin DDR4 DIMM fit the memory slots in my HP server?
Yes — the module uses the standard DDR4 DIMM 288-pin form factor that matches the slots in HP systems designed for 815098-S21, 850880-001 or 872837-091 memory.
Do I need to configure anything in BIOS after installing this registered ECC module?
Install the DIMM with the server powered off; most HP platforms auto-detect the 2666 MHz CL19 1.20 V registered ECC timings, but verify the memory mode in BIOS if the system does not show the full 16 GB.
When should I expect to replace this 1Rx4 server memory module?
The module is rated for continuous server operation at 1.2 V DDR4 standard voltage; plan replacement only if diagnostics report correctable ECC errors rising or the system fails memory tests.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
