FSP
FSP 1350 power supply 1350W ATX 3.1 PCIe 5.1 80 Plus Platinum
ATX 3.1 compliant 1350 W unit with dual PCIe 5.1 connectors and 80 Plus Platinum efficiency
- TypeATX 3.0 Compatible
- Maximum Power1350 W
- PFCActive
- Main Connector24Pin
- +12V Rails2
- PCI-Express Connector1 x 6+2-Pin
- Delivers 1350 W for high-end multi-GPU builds
- 80 Plus Platinum rating reaches 92 % efficiency at typical load
- ATX 3.1 and PCIe 5.1 (12V-2X6) connectors support latest graphics cards
- Eco semi-fanless switch stops the 135 mm FDB fan at low load
- Fully modular ribbon cables simplify routing and keep the interior tidy
High-wattage ATX 3.1 supply for demanding builds
This 1350 W unit meets ATX 3.1 and PCIe 5.1 requirements, delivering up to 1350 watts through a single +12 V rail. It targets enthusiasts and workstation builders who need headroom for multi-GPU configurations or sustained heavy compute loads. The fully modular design uses flat ribbon cables to simplify routing in tight chassis.
Semi-fanless operation and 92 % typical efficiency
An eco switch enables semi-fanless mode, so the 135 mm FDB fan stays off until internal temperatures demand active cooling. At typical loads the unit exceeds 92 % efficiency, reducing waste heat and keeping power draw from the wall lower. Active PFC handles 110 – 240 V input automatically for worldwide use.
Ribbon cables, DC-to-DC modules
Flat ribbon cables improve cable management and airflow compared with traditional sleeved wires. Separate +3.3 V and +5 V DC-to-DC modules provide tighter voltage regulation for modern platforms. Magnetic side stickers can be swapped to match a build theme without tools. Full protection suite covers over-current, over-voltage, over-power, short-circuit, over-temperature and under-voltage events.
Βασικά χαρακτηριστικά
- Delivers 1350 W for high-end multi-GPU builds
- 80 Plus Platinum rating reaches 92 % efficiency at typical load
- ATX 3.1 and PCIe 5.1 (12V-2X6) connectors support latest graphics cards
- Eco semi-fanless switch stops the 135 mm FDB fan at low load
- Fully modular ribbon cables simplify routing and keep the interior tidy
Προδιαγραφές
| Brand | FSP Group |
|---|---|
| Series | 80 Plus |
| Model | 1350 |
| Type | ATX 3.0 Compatible |
| Maximum Power | 1350 W |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | 2 |
| PCI-Express Connector | 1 x 6+2-Pin |
| Modular | Yes |
| Efficiency | > 79% |
| Energy-Efficient | 80 PLUS Certified |
| Connectors | 1 x 24 pin ATX |
| Weight | 10 |
| Input Voltage | 110 - 120 V/ 220 - 240 V |
Ερωτήσεις για αυτό το προϊόν
Will this unit fit a standard ATX case and deliver the full 1350 W on a 240 V mains supply?
Yes, it follows the ATX form factor and the input range covers 220 – 240 V, so full rated power is available on UK mains.
Does the modular cable set include two native 12V-2X6 connectors for modern PCIe 5.1 graphics cards?
The specification lists two PCIe 5.1 (12V-2X6) connectors, so current-generation GPUs can be powered without adapters.
How quiet is the 135 mm FDB fan under light loads?
An eco semi-fanless switch stops the fan completely until internal temperatures rise, giving silent operation at idle and low load.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



