SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497165BTC
在庫あり
FSP
FSP 1350 power supply 1350W ATX 3.1 PCIe 5.1 80 Plus Platinum
ATX 3.1 compliant 1350 W unit with dual PCIe 5.1 connectors and 80 Plus Platinum efficiency
- TypeATX 3.0 Compatible
- Maximum Power1350 W
- PFCActive
- Main Connector24Pin
- +12V Rails2
- PCI-Express Connector1 x 6+2-Pin
- Delivers 1350 W for high-end multi-GPU builds
- 80 Plus Platinum rating reaches 92 % efficiency at typical load
- ATX 3.1 and PCIe 5.1 (12V-2X6) connectors support latest graphics cards
- Eco semi-fanless switch stops the 135 mm FDB fan at low load
- Fully modular ribbon cables simplify routing and keep the interior tidy
High-wattage ATX 3.1 supply for demanding builds
This 1350 W unit meets ATX 3.1 and PCIe 5.1 requirements, delivering up to 1350 watts through a single +12 V rail. It targets enthusiasts and workstation builders who need headroom for multi-GPU configurations or sustained heavy compute loads. The fully modular design uses flat ribbon cables to simplify routing in tight chassis.
Semi-fanless operation and 92 % typical efficiency
An eco switch enables semi-fanless mode, so the 135 mm FDB fan stays off until internal temperatures demand active cooling. At typical loads the unit exceeds 92 % efficiency, reducing waste heat and keeping power draw from the wall lower. Active PFC handles 110 – 240 V input automatically for worldwide use.
Ribbon cables, DC-to-DC modules
Flat ribbon cables improve cable management and airflow compared with traditional sleeved wires. Separate +3.3 V and +5 V DC-to-DC modules provide tighter voltage regulation for modern platforms. Magnetic side stickers can be swapped to match a build theme without tools. Full protection suite covers over-current, over-voltage, over-power, short-circuit, over-temperature and under-voltage events.
特長
- Delivers 1350 W for high-end multi-GPU builds
- 80 Plus Platinum rating reaches 92 % efficiency at typical load
- ATX 3.1 and PCIe 5.1 (12V-2X6) connectors support latest graphics cards
- Eco semi-fanless switch stops the 135 mm FDB fan at low load
- Fully modular ribbon cables simplify routing and keep the interior tidy
仕様
| Brand | FSP Group |
|---|---|
| Series | 80 Plus |
| Model | 1350 |
| Type | ATX 3.0 Compatible |
| Maximum Power | 1350 W |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | 2 |
| PCI-Express Connector | 1 x 6+2-Pin |
| Modular | Yes |
| Efficiency | > 79% |
| Energy-Efficient | 80 PLUS Certified |
| Connectors | 1 x 24 pin ATX |
| Weight | 10 |
| Input Voltage | 110 - 120 V/ 220 - 240 V |
この商品に関する質問
Will this unit fit a standard ATX case and deliver the full 1350 W on a 240 V mains supply?
Yes, it follows the ATX form factor and the input range covers 220 – 240 V, so full rated power is available on UK mains.
Does the modular cable set include two native 12V-2X6 connectors for modern PCIe 5.1 graphics cards?
The specification lists two PCIe 5.1 (12V-2X6) connectors, so current-generation GPUs can be powered without adapters.
How quiet is the 135 mm FDB fan under light loads?
An eco semi-fanless switch stops the fan completely until internal temperatures rise, giving silent operation at idle and low load.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
