Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Rectangular black ATX power supply with modular cable sockets and a 135 mm fan grille

FSP

FSP 1350 power supply 1350W ATX 3.1 PCIe 5.1 80 Plus Platinum

SKU CH-R72H-17PT7 MPN 1350

ATX 3.1 compliant 1350 W unit with dual PCIe 5.1 connectors and 80 Plus Platinum efficiency

  • TypeATX 3.0 Compatible
  • Maximum Power1350 W
  • PFCActive
  • Main Connector24Pin
  • +12V Rails2
  • PCI-Express Connector1 x 6+2-Pin
  • Delivers 1350 W for high-end multi-GPU builds
  • 80 Plus Platinum rating reaches 92 % efficiency at typical load
  • ATX 3.1 and PCIe 5.1 (12V-2X6) connectors support latest graphics cards
  • Eco semi-fanless switch stops the 135 mm FDB fan at low load
  • Fully modular ribbon cables simplify routing and keep the interior tidy

High-wattage ATX 3.1 supply for demanding builds

This 1350 W unit meets ATX 3.1 and PCIe 5.1 requirements, delivering up to 1350 watts through a single +12 V rail. It targets enthusiasts and workstation builders who need headroom for multi-GPU configurations or sustained heavy compute loads. The fully modular design uses flat ribbon cables to simplify routing in tight chassis.

Semi-fanless operation and 92 % typical efficiency

An eco switch enables semi-fanless mode, so the 135 mm FDB fan stays off until internal temperatures demand active cooling. At typical loads the unit exceeds 92 % efficiency, reducing waste heat and keeping power draw from the wall lower. Active PFC handles 110 – 240 V input automatically for worldwide use.

Ribbon cables, DC-to-DC modules

Flat ribbon cables improve cable management and airflow compared with traditional sleeved wires. Separate +3.3 V and +5 V DC-to-DC modules provide tighter voltage regulation for modern platforms. Magnetic side stickers can be swapped to match a build theme without tools. Full protection suite covers over-current, over-voltage, over-power, short-circuit, over-temperature and under-voltage events.

Punti di forza

  • Delivers 1350 W for high-end multi-GPU builds
  • 80 Plus Platinum rating reaches 92 % efficiency at typical load
  • ATX 3.1 and PCIe 5.1 (12V-2X6) connectors support latest graphics cards
  • Eco semi-fanless switch stops the 135 mm FDB fan at low load
  • Fully modular ribbon cables simplify routing and keep the interior tidy

Caratteristiche tecniche

BrandFSP Group
Series80 Plus
Model1350
TypeATX 3.0 Compatible
Maximum Power1350 W
PFCActive
Main Connector24Pin
+12V Rails2
PCI-Express Connector1 x 6+2-Pin
ModularYes
Efficiency> 79%
Energy-Efficient80 PLUS Certified
Connectors1 x 24 pin ATX
Weight10
Input Voltage110 - 120 V/ 220 - 240 V

Domande su questo articolo

Will this unit fit a standard ATX case and deliver the full 1350 W on a 240 V mains supply?

Yes, it follows the ATX form factor and the input range covers 220 – 240 V, so full rated power is available on UK mains.

Does the modular cable set include two native 12V-2X6 connectors for modern PCIe 5.1 graphics cards?

The specification lists two PCIe 5.1 (12V-2X6) connectors, so current-generation GPUs can be powered without adapters.

How quiet is the 135 mm FDB fan under light loads?

An eco semi-fanless switch stops the fan completely until internal temperatures rise, giving silent operation at idle and low load.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.