BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278297BTC
Διαθέσιμο
G.SKILL
G.SKILL F3-2400C10Q-16GTX 16GB (4 x 4GB) DDR3 2400 CL10 desktop RAM
Quad-channel 16 GB DDR3 2400 kit with CL10 10-12-12-31 timings at 1.65 V
- Capacity16GB (4 x 4GB)
- SpeedDDR3 2400 (PC3 19200)
- CAS LatencyCL10
- Timing10-12-12-31
- Voltage1.65V
- ECCNo
- Quad-channel kit delivers 16 GB for multi-threaded workloads
- DDR3 2400 speed enables high-bandwidth data transfers
- CL10 10-12-12-31 timings reduce access latency
- 65 V operation supports stable overclocking headroom
- Intel XMP 1.3 profile simplifies one-click configuration
TridentX DDR3 2400 quad-channel kit
This 16 GB kit contains four 4 GB DDR3 modules rated at 2400 MT/s with CL10 timings. It is built for enthusiasts running 3rd Generation Intel Core processors on Z77 platforms who want high-frequency memory out of the box.
Sustained load behaviour with removable fin
The aluminium fin increases surface area to keep modules cooler during extended sessions. It can be removed when a large CPU cooler or custom loop needs the clearance, letting the same sticks adapt to different thermal environments.
Installation notes for four-slot population
Populating all four DIMM slots at 1.65 V can stress the memory controller on some Z77 boards. Builders should enable the XMP 1.3 profile in BIOS and verify stability with memory-test software before relying on the system for daily work.
Βασικά χαρακτηριστικά
- Quad-channel kit delivers 16 GB for multi-threaded workloads
- DDR3 2400 speed enables high-bandwidth data transfers
- CL10 10-12-12-31 timings reduce access latency
- 65 V operation supports stable overclocking headroom
- Intel XMP 1.3 profile simplifies one-click configuration
Προδιαγραφές
| Brand | G.SKILL |
|---|---|
| Series | TridentX Series |
| Model | F3-2400C10Q-16GTX |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 2400 (PC3 19200) |
| CAS Latency | CL10 |
| Timing | 10-12-12-31 |
| Voltage | 1.65V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Features | Designed for 3rd Generation Intel Core Processors and Z77 platform. Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors. Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance. Please check gskill.com for motherboard compatibility chart. |
| Βάρος αποστολής | 0.37 kg |
| Διαστάσεις συσκευασίας | 206 × 135 × 25 mm |
Ερωτήσεις για αυτό το προϊόν
How much heat and power does this 1.65 V DDR3 2400 kit draw when running all day?
The modules operate at 1.65 V with CL10 10-12-12-31 timings; higher voltage means more heat than standard 1.5 V DDR3, so ensure your case airflow can handle the extra warmth during sustained loads.
What must my motherboard and CPU already support for this quad-channel kit to run at its rated 2400 MHz?
You need a Z77-platform board with four DDR3 slots and a 3rd-generation Intel Core i7-3770K or i5-3570K (or equivalent) that can drive the XMP 1.3 profile at 1.65 V.
Will these TridentX modules fit alongside a large tower cooler I already own?
The removable heat-spreader fins can be taken off to clear bulky CPU coolers, then reinstalled if you want the extra surface area for memory cooling.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
