BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278766BTC
I lager
G.SKILL
G.SKILL F3-2400C10Q-16GTX 16GB (4 x 4GB) DDR3 2400 CL10 desktop RAM
Quad-channel 16 GB DDR3 2400 kit with CL10 10-12-12-31 timings at 1.65 V
- Capacity16GB (4 x 4GB)
- SpeedDDR3 2400 (PC3 19200)
- CAS LatencyCL10
- Timing10-12-12-31
- Voltage1.65V
- ECCNo
- Quad-channel kit delivers 16 GB for multi-threaded workloads
- DDR3 2400 speed enables high-bandwidth data transfers
- CL10 10-12-12-31 timings reduce access latency
- 65 V operation supports stable overclocking headroom
- Intel XMP 1.3 profile simplifies one-click configuration
TridentX DDR3 2400 quad-channel kit
This 16 GB kit contains four 4 GB DDR3 modules rated at 2400 MT/s with CL10 timings. It is built for enthusiasts running 3rd Generation Intel Core processors on Z77 platforms who want high-frequency memory out of the box.
Sustained load behaviour with removable fin
The aluminium fin increases surface area to keep modules cooler during extended sessions. It can be removed when a large CPU cooler or custom loop needs the clearance, letting the same sticks adapt to different thermal environments.
Installation notes for four-slot population
Populating all four DIMM slots at 1.65 V can stress the memory controller on some Z77 boards. Builders should enable the XMP 1.3 profile in BIOS and verify stability with memory-test software before relying on the system for daily work.
I korthet
- Quad-channel kit delivers 16 GB for multi-threaded workloads
- DDR3 2400 speed enables high-bandwidth data transfers
- CL10 10-12-12-31 timings reduce access latency
- 65 V operation supports stable overclocking headroom
- Intel XMP 1.3 profile simplifies one-click configuration
Specifikationer
| Brand | G.SKILL |
|---|---|
| Series | TridentX Series |
| Model | F3-2400C10Q-16GTX |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 2400 (PC3 19200) |
| CAS Latency | CL10 |
| Timing | 10-12-12-31 |
| Voltage | 1.65V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Features | Designed for 3rd Generation Intel Core Processors and Z77 platform. Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors. Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance. Please check gskill.com for motherboard compatibility chart. |
| Fraktvikt | 0.37 kg |
| Paketstorlek | 206 × 135 × 25 mm |
Frågor om den här produkten
How much heat and power does this 1.65 V DDR3 2400 kit draw when running all day?
The modules operate at 1.65 V with CL10 10-12-12-31 timings; higher voltage means more heat than standard 1.5 V DDR3, so ensure your case airflow can handle the extra warmth during sustained loads.
What must my motherboard and CPU already support for this quad-channel kit to run at its rated 2400 MHz?
You need a Z77-platform board with four DDR3 slots and a 3rd-generation Intel Core i7-3770K or i5-3570K (or equivalent) that can drive the XMP 1.3 profile at 1.65 V.
Will these TridentX modules fit alongside a large tower cooler I already own?
The removable heat-spreader fins can be taken off to clear bulky CPU coolers, then reinstalled if you want the extra surface area for memory cooling.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
