Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Four black DDR3 modules with tall finned heat spreaders and red TridentX branding

G.SKILL

G.SKILL F3-2400C10Q-16GTX 16GB (4 x 4GB) DDR3 2400 CL10 desktop RAM

SKU CH-2032-KYQ25 MPN F3-2400C10Q-16GTX

Quad-channel 16 GB DDR3 2400 kit with CL10 10-12-12-31 timings at 1.65 V

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2400 (PC3 19200)
  • CAS LatencyCL10
  • Timing10-12-12-31
  • Voltage1.65V
  • ECCNo
  • Quad-channel kit delivers 16 GB for multi-threaded workloads
  • DDR3 2400 speed enables high-bandwidth data transfers
  • CL10 10-12-12-31 timings reduce access latency
  • 65 V operation supports stable overclocking headroom
  • Intel XMP 1.3 profile simplifies one-click configuration

TridentX DDR3 2400 quad-channel kit

This 16 GB kit contains four 4 GB DDR3 modules rated at 2400 MT/s with CL10 timings. It is built for enthusiasts running 3rd Generation Intel Core processors on Z77 platforms who want high-frequency memory out of the box.

Sustained load behaviour with removable fin

The aluminium fin increases surface area to keep modules cooler during extended sessions. It can be removed when a large CPU cooler or custom loop needs the clearance, letting the same sticks adapt to different thermal environments.

Installation notes for four-slot population

Populating all four DIMM slots at 1.65 V can stress the memory controller on some Z77 boards. Builders should enable the XMP 1.3 profile in BIOS and verify stability with memory-test software before relying on the system for daily work.

Najważniejsze cechy

  • Quad-channel kit delivers 16 GB for multi-threaded workloads
  • DDR3 2400 speed enables high-bandwidth data transfers
  • CL10 10-12-12-31 timings reduce access latency
  • 65 V operation supports stable overclocking headroom
  • Intel XMP 1.3 profile simplifies one-click configuration

Specyfikacja

BrandG.SKILL
SeriesTridentX Series
ModelF3-2400C10Q-16GTX
Capacity16GB (4 x 4GB)
SpeedDDR3 2400 (PC3 19200)
CAS LatencyCL10
Timing10-12-12-31
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
FeaturesDesigned for 3rd Generation Intel Core Processors and Z77 platform.
Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors.
Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance.
Please check gskill.com for motherboard compatibility chart.
Waga przesyłki0.37 kg
Wymiary opakowania206 × 135 × 25 mm

Pytania dotyczące tego produktu

How much heat and power does this 1.65 V DDR3 2400 kit draw when running all day?

The modules operate at 1.65 V with CL10 10-12-12-31 timings; higher voltage means more heat than standard 1.5 V DDR3, so ensure your case airflow can handle the extra warmth during sustained loads.

What must my motherboard and CPU already support for this quad-channel kit to run at its rated 2400 MHz?

You need a Z77-platform board with four DDR3 slots and a 3rd-generation Intel Core i7-3770K or i5-3570K (or equivalent) that can drive the XMP 1.3 profile at 1.65 V.

Will these TridentX modules fit alongside a large tower cooler I already own?

The removable heat-spreader fins can be taken off to clear bulky CPU coolers, then reinstalled if you want the extra surface area for memory cooling.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.