Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four black DDR3 modules with tall finned heat spreaders and red TridentX branding

G.SKILL

G.SKILL F3-2400C10Q-16GTX 16GB (4 x 4GB) DDR3 2400 CL10 desktop RAM

SKU CH-2032-KYQ25 MPN F3-2400C10Q-16GTX

Quad-channel 16 GB DDR3 2400 kit with CL10 10-12-12-31 timings at 1.65 V

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2400 (PC3 19200)
  • CAS LatencyCL10
  • Timing10-12-12-31
  • Voltage1.65V
  • ECCNo
  • Quad-channel kit delivers 16 GB for multi-threaded workloads
  • DDR3 2400 speed enables high-bandwidth data transfers
  • CL10 10-12-12-31 timings reduce access latency
  • 65 V operation supports stable overclocking headroom
  • Intel XMP 1.3 profile simplifies one-click configuration

TridentX DDR3 2400 quad-channel kit

This 16 GB kit contains four 4 GB DDR3 modules rated at 2400 MT/s with CL10 timings. It is built for enthusiasts running 3rd Generation Intel Core processors on Z77 platforms who want high-frequency memory out of the box.

Sustained load behaviour with removable fin

The aluminium fin increases surface area to keep modules cooler during extended sessions. It can be removed when a large CPU cooler or custom loop needs the clearance, letting the same sticks adapt to different thermal environments.

Installation notes for four-slot population

Populating all four DIMM slots at 1.65 V can stress the memory controller on some Z77 boards. Builders should enable the XMP 1.3 profile in BIOS and verify stability with memory-test software before relying on the system for daily work.

Kohokohdat

  • Quad-channel kit delivers 16 GB for multi-threaded workloads
  • DDR3 2400 speed enables high-bandwidth data transfers
  • CL10 10-12-12-31 timings reduce access latency
  • 65 V operation supports stable overclocking headroom
  • Intel XMP 1.3 profile simplifies one-click configuration

Tekniset tiedot

BrandG.SKILL
SeriesTridentX Series
ModelF3-2400C10Q-16GTX
Capacity16GB (4 x 4GB)
SpeedDDR3 2400 (PC3 19200)
CAS LatencyCL10
Timing10-12-12-31
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
FeaturesDesigned for 3rd Generation Intel Core Processors and Z77 platform.
Intel XMP 1.3 Ready for 3rd Generation Intel Core Processors.
Recommended Intel Core i7-3770K processors & Core i5-3570K processors for best performance.
Please check gskill.com for motherboard compatibility chart.
Lähetyspaino0.37 kg
Pakkauksen mitat206 × 135 × 25 mm

Kysymyksiä tästä tuotteesta

How much heat and power does this 1.65 V DDR3 2400 kit draw when running all day?

The modules operate at 1.65 V with CL10 10-12-12-31 timings; higher voltage means more heat than standard 1.5 V DDR3, so ensure your case airflow can handle the extra warmth during sustained loads.

What must my motherboard and CPU already support for this quad-channel kit to run at its rated 2400 MHz?

You need a Z77-platform board with four DDR3 slots and a 3rd-generation Intel Core i7-3770K or i5-3570K (or equivalent) that can drive the XMP 1.3 profile at 1.65 V.

Will these TridentX modules fit alongside a large tower cooler I already own?

The removable heat-spreader fins can be taken off to clear bulky CPU coolers, then reinstalled if you want the extra surface area for memory cooling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.