SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
HP
A 500 GB 2.5-inch internal hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface for server storage
This 500 GB internal hard drive uses a 2.5 inch form factor and a SATA 6.0Gb/s interface. It spins at 7200 RPM and is designed for HP ProLiant Gen8 servers. The drive measures 15.75mm in height, 75.7mm in width and 118.62mm in length.
The drive suits entry server and external storage environments with low workloads of 40% or less. It is built for backups, archival applications and non-mission critical tasks where economical reliability is the priority. Buyers who need higher workload endurance or mission-critical reliability should look elsewhere.
The physical height of 15.75mm determines whether this drive fits the target drive bay. Verify the server or enclosure specification for 2.5 inch bays that accept this exact height before purchase.
| Brand | HP |
|---|---|
| Model | 655708-B21 |
| Interface | SATA 6.0Gb/s |
| RPM | 7200 RPM |
| Features | HP SATA Hard Drives are designed for the reliability and larger capacities demanded by today's entry server and external storage environments. HP SATA Midline drives are designed with economical reliability and performance for external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers, and the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA drives are available in both Large Form Factor (LFF) (3.5-inch) and Small Form Factor (SFF) (2.5-inch) and ship with a standard one |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.75mm |
| Width (maximum) | 75.7mm |
| Length (maximum) | 118.62mm |
| Βάρος αποστολής | 0.57 kg |
| Διαστάσεις συσκευασίας | 185 × 112 × 25 mm |
Yes, the 2.5-inch drive measures 15.75 mm tall, 75.7 mm wide and 118.62 mm long, matching the standard small-form-factor bay used in ProLiant Gen8 servers.
The drive uses a standard 7-pin SATA interface; most ProLiant Gen8 bays accept it directly, but some configurations require the HP drive caddy — check your chassis manual before installing.
HP rates Midline SATA drives for workloads of 40 % or less; under that duty cycle the 500 GB unit typically reaches its design life before mechanical wear requires replacement.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;