SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
HP
A 500 GB 2.5-inch internal hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface for server storage
This 500 GB internal hard drive uses a 2.5 inch form factor and a SATA 6.0Gb/s interface. It spins at 7200 RPM and is designed for HP ProLiant Gen8 servers. The drive measures 15.75mm in height, 75.7mm in width and 118.62mm in length.
The drive suits entry server and external storage environments with low workloads of 40% or less. It is built for backups, archival applications and non-mission critical tasks where economical reliability is the priority. Buyers who need higher workload endurance or mission-critical reliability should look elsewhere.
The physical height of 15.75mm determines whether this drive fits the target drive bay. Verify the server or enclosure specification for 2.5 inch bays that accept this exact height before purchase.
| Brand | HP |
|---|---|
| Model | 655708-B21 |
| Interface | SATA 6.0Gb/s |
| RPM | 7200 RPM |
| Features | HP SATA Hard Drives are designed for the reliability and larger capacities demanded by today's entry server and external storage environments. HP SATA Midline drives are designed with economical reliability and performance for external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers, and the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA drives are available in both Large Form Factor (LFF) (3.5-inch) and Small Form Factor (SFF) (2.5-inch) and ship with a standard one |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.75mm |
| Width (maximum) | 75.7mm |
| Length (maximum) | 118.62mm |
| Teža pošiljke | 0.57 kg |
| Velikost pošiljke | 185 × 112 × 25 mm |
Yes, the 2.5-inch drive measures 15.75 mm tall, 75.7 mm wide and 118.62 mm long, matching the standard small-form-factor bay used in ProLiant Gen8 servers.
The drive uses a standard 7-pin SATA interface; most ProLiant Gen8 bays accept it directly, but some configurations require the HP drive caddy — check your chassis manual before installing.
HP rates Midline SATA drives for workloads of 40 % or less; under that duty cycle the 500 GB unit typically reaches its design life before mechanical wear requires replacement.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?