Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2.5 inch internal hard drive with SATA connector

HP

HP 655708-B21 500 GB 7200 RPM SATA 6.0Gb/s 2.5" internal hard drive

SKU CH-0GBV-FTYJP MPN 655708-B21

A 500 GB 2.5-inch internal hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface for server storage

  • InterfaceSATA 6.0Gb/s
  • RPM7200 RPM
  • FeaturesHP SATA Hard Drives are designed for the reliability and lar
  • UsageIdeal for Servers
  • Form Factor2.5"
  • Height (maximum)15.75mm
  • 500 GB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast data access
  • SATA 6.0Gb/s interface enables 6144 MB/s transfer rate
  • 5-inch form factor fits dense server bays
  • Designed for entry server and external storage workloads

500 GB 2.5" SATA 6.0Gb/s drive

This 500 GB internal hard drive uses a 2.5 inch form factor and a SATA 6.0Gb/s interface. It spins at 7200 RPM and is designed for HP ProLiant Gen8 servers. The drive measures 15.75mm in height, 75.7mm in width and 118.62mm in length.

Server storage and archival use

The drive suits entry server and external storage environments with low workloads of 40% or less. It is built for backups, archival applications and non-mission critical tasks where economical reliability is the priority. Buyers who need higher workload endurance or mission-critical reliability should look elsewhere.

15.75mm drive height

The physical height of 15.75mm determines whether this drive fits the target drive bay. Verify the server or enclosure specification for 2.5 inch bays that accept this exact height before purchase.

Přednosti

  • 500 GB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast data access
  • SATA 6.0Gb/s interface enables 6144 MB/s transfer rate
  • 5-inch form factor fits dense server bays
  • Designed for entry server and external storage workloads

Specifikace

BrandHP
Model655708-B21
InterfaceSATA 6.0Gb/s
RPM7200 RPM
FeaturesHP SATA Hard Drives are designed for the reliability and larger capacities demanded by today's entry server and external storage environments. HP SATA Midline drives are designed with economical reliability and performance for external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers, and the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA drives are available in both Large Form Factor (LFF) (3.5-inch) and Small Form Factor (SFF) (2.5-inch) and ship with a standard one
UsageIdeal for Servers
Form Factor2.5"
Height (maximum)15.75mm
Width (maximum)75.7mm
Length (maximum)118.62mm
Přepravní hmotnost0.57 kg
Rozměry balení185 × 112 × 25 mm

Otázky k tomuto produktu

Will the 2.5-inch form factor with 15.75 mm height fit my ProLiant Gen8 drive bay?

Yes, the 2.5-inch drive measures 15.75 mm tall, 75.7 mm wide and 118.62 mm long, matching the standard small-form-factor bay used in ProLiant Gen8 servers.

Does the 7-pin SATA connector plug straight into the server backplane, or do I need a caddy?

The drive uses a standard 7-pin SATA interface; most ProLiant Gen8 bays accept it directly, but some configurations require the HP drive caddy — check your chassis manual before installing.

How often should I expect to replace a 7200 RPM drive running 40 % workload in a backup array?

HP rates Midline SATA drives for workloads of 40 % or less; under that duty cycle the 500 GB unit typically reaches its design life before mechanical wear requires replacement.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.