Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

HPE

HPE 801882-B21 1TB 7200 RPM SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-Y8RE-Z7S71 MPN 801882-B21

A 1 TB 3.5 inch desktop hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity1TB
  • NAND Flash Memory TypeOthers
  • RPM7200 RPM
  • Average Latency6Gb/s
  • 1TB capacity stores large data sets
  • 7200 RPM spindle delivers fast read and write speeds
  • SATA 6.0Gb/s interface enables high throughput
  • 5 inch form factor fits standard desktop bays
  • New condition means full manufacturer reliability

1 TB 7200 RPM SATA hard drive

This 1 TB 3.5 inch internal hard drive spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It is built for entry servers and external storage enclosures that need economical capacity with low workloads. The bare-drive unit is supplied new and carries a 30 day warranty.

Ideal for bulk storage and archival

The drive suits users who want high-capacity bulk storage, backups or archival workloads running at 40 percent duty cycle or less. It is not intended for mission-critical arrays, heavy transactional databases or any environment that demands sustained high-intensity I/O. Buyers needing faster random access or enterprise-grade endurance should consider a different class of drive.

Verify 3.5 inch bay and SATA port

Confirm that your chassis has a free 3.5 inch drive bay and an available SATA data port on the motherboard or controller. Ensure the power supply provides a SATA power connector for the drive. Check that your system BIOS or RAID controller recognises SATA 6.0Gb/s devices before installation.

Βασικά χαρακτηριστικά

  • 1TB capacity stores large data sets
  • 7200 RPM spindle delivers fast read and write speeds
  • SATA 6.0Gb/s interface enables high throughput
  • 5 inch form factor fits standard desktop bays
  • New condition means full manufacturer reliability

Προδιαγραφές

BrandHP
Model801882-B21
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity1TB
NAND Flash Memory TypeOthers
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"
Βάρος αποστολής1.18 kg
Διαστάσεις συσκευασίας249 × 201 × 168 mm

Ερωτήσεις για αυτό το προϊόν

Does my system need a free SATA 6.0Gb/s port and a 3.5-inch drive bay to install this 801882-B21 drive?

Yes, the drive connects via a SATA 6.0Gb/s interface and uses the standard 3.5-inch form factor, so an available SATA data port, a SATA power connector and a 3.5-inch bay are required.

Will this 7200 RPM SATA midline drive work reliably alongside older SATA 3.0Gb/s drives in the same array?

The drive is backward compatible with SATA 3.0Gb/s controllers and will operate at the lower link speed, allowing mixed-speed arrays while still delivering 7200 RPM performance.

How can I verify the 801882-B21 is healthy and running at the correct speed after installation?

Use SMART monitoring tools or HP Systems Insight Manager to check drive health, confirm the negotiated SATA 6.0Gb/s link speed and validate the 7200 RPM spindle rate.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.