SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
HPE
A 1 TB 3.5 inch desktop hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface
This 1 TB 3.5 inch internal hard drive spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It is built for entry servers and external storage enclosures that need economical capacity with low workloads. The bare-drive unit is supplied new and carries a 30 day warranty.
The drive suits users who want high-capacity bulk storage, backups or archival workloads running at 40 percent duty cycle or less. It is not intended for mission-critical arrays, heavy transactional databases or any environment that demands sustained high-intensity I/O. Buyers needing faster random access or enterprise-grade endurance should consider a different class of drive.
Confirm that your chassis has a free 3.5 inch drive bay and an available SATA data port on the motherboard or controller. Ensure the power supply provides a SATA power connector for the drive. Check that your system BIOS or RAID controller recognises SATA 6.0Gb/s devices before installation.
| Brand | HP |
|---|---|
| Model | 801882-B21 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | Others |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 3.5" |
| وزن الشحنة | 1.18 kg |
| أبعاد الطرد | 249 × 201 × 168 mm |
Yes, the drive connects via a SATA 6.0Gb/s interface and uses the standard 3.5-inch form factor, so an available SATA data port, a SATA power connector and a 3.5-inch bay are required.
The drive is backward compatible with SATA 3.0Gb/s controllers and will operate at the lower link speed, allowing mixed-speed arrays while still delivering 7200 RPM performance.
Use SMART monitoring tools or HP Systems Insight Manager to check drive health, confirm the negotiated SATA 6.0Gb/s link speed and validate the 7200 RPM spindle rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟