SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
HPE
A 1 TB 3.5 inch desktop hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface
This 1 TB 3.5 inch internal hard drive spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It is built for entry servers and external storage enclosures that need economical capacity with low workloads. The bare-drive unit is supplied new and carries a 30 day warranty.
The drive suits users who want high-capacity bulk storage, backups or archival workloads running at 40 percent duty cycle or less. It is not intended for mission-critical arrays, heavy transactional databases or any environment that demands sustained high-intensity I/O. Buyers needing faster random access or enterprise-grade endurance should consider a different class of drive.
Confirm that your chassis has a free 3.5 inch drive bay and an available SATA data port on the motherboard or controller. Ensure the power supply provides a SATA power connector for the drive. Check that your system BIOS or RAID controller recognises SATA 6.0Gb/s devices before installation.
| Brand | HP |
|---|---|
| Model | 801882-B21 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | Others |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 3.5" |
| Prepravná hmotnosť | 1.18 kg |
| Rozmery balenia | 249 × 201 × 168 mm |
Yes, the drive connects via a SATA 6.0Gb/s interface and uses the standard 3.5-inch form factor, so an available SATA data port, a SATA power connector and a 3.5-inch bay are required.
The drive is backward compatible with SATA 3.0Gb/s controllers and will operate at the lower link speed, allowing mixed-speed arrays while still delivering 7200 RPM performance.
Use SMART monitoring tools or HP Systems Insight Manager to check drive health, confirm the negotiated SATA 6.0Gb/s link speed and validate the 7200 RPM spindle rate.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?