Two silver and black DDR5 memory modules with RGB lighting

Kingston Technology Corp.

Kingston Technology Corp. Fury Renegade KF560C32RSAK2-96 96GB (2 x 48GB) DDR5 6000 CL32

SKU CH-34GZ-HS04K MPN KF560C32RSAK2-96

A 96 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 latency and RGB lighting

Capacity96GB (2 x 48GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL32
Timing32-38-38-76
Voltage1.35V

LED Color RGB

None
RGB

Massive 96 GB capacity across two 48 GB modules
DDR5 6000 speed with PC5 48000 bandwidth rating
Low CL32 latency and 32-38-38-76 timings for responsive performance
Intel XMP 3.0 profile enables one-click overclocking to rated speeds
RGB lighting in silver and black design adds visual flair

1.120,99 $

0.01446196 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

96GB dual-channel DDR5 kit

This Fury Renegade kit delivers 96GB total capacity through two 48GB modules rated for DDR5-6000 at CL32 32-38-38-76. It runs at 1.35V with Intel XMP 3.0 profiles and includes RGB lighting on silver and black heatsinks.

High-capacity DDR5 for Intel and AMD platforms

The 288-pin modules target workstations and gaming systems using Intel 600, 700 series or AMD 600 series chipsets where 96GB is supported. Builds limited to lower maximum memory per slot or requiring JEDEC-only operation should consider smaller or slower kits.

1.35V XMP 3.0 voltage requirement

Each module is validated at DDR5-6000 CL32 only when the memory controller can supply 1.35V through an enabled XMP 3.0 profile; at default JEDEC settings the SPD programs DDR5-4800 at 40-39-39 and 1.1V.

Βασικά χαρακτηριστικά

Massive 96 GB capacity across two 48 GB modules
DDR5 6000 speed with PC5 48000 bandwidth rating
Low CL32 latency and 32-38-38-76 timings for responsive performance
Intel XMP 3.0 profile enables one-click overclocking to rated speeds
RGB lighting in silver and black design adds visual flair

Προδιαγραφές

Brand	Kingston
Series	Fury Renegade
Model	KF560C32RSAK2-96
Capacity	96GB (2 x 48GB)
Type	288-Pin PC RAM
Speed	DDR5 6000 (PC5 48000)
CAS Latency	CL32
Timing	32-38-38-76
Voltage	1.35V
Multi-channel Kit	Dual Channel Kit
BIOS/Performance Profile	Intel XMP 3.0
Color	Silver / Black
Features	Kingston FURY KF560C32RSAK2-96 is a kit of two 6G x 64-bit (48GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 3G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 96GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Recommend Use	AMD & Intel Compatible / AMD B650 / AMD Ryzen Compatible / AMD X670 / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z690 / Intel Z790
LED Color	RGB
Βάρος αποστολής	0.16 kg
Διαστάσεις συσκευασίας	171 × 130 × 15 mm

Άλλες εκδόσεις αυτού του μοντέλου

1 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Kingston Technology Corp.

Kingston Technology Corp. Fury Renegade 96GB (2 x 48GB) DDR5 6000 CL32 desktop RAM KF560C32RSK2-96

96GB (2 x 48GB)
288-Pin PC RAM

705,99 $

0.00910802BTC

Διαθέσιμο

Ερωτήσεις για αυτό το προϊόν

What motherboard slot does the 288-pin DDR5 kit require?

The kit fits a standard 288-pin DDR5 DIMM slot on an Intel 600 or 700 series board or an AMD B650 or X670 board.

Will the modules run at their rated 6000 speed on a board that only supports JEDEC DDR5-4800?

By default the SPD is set to 4800 at 1.1V with 40-39-39 timing; enabling the Intel XMP 3.0 profile raises speed to 6000 at 1.35V with 32-38-38-76 timing.

How can I confirm the kit is running at the XMP 6000 CL32 profile after enabling it?

Check the memory tab in CPU-Z or the BIOS main screen; it should show 6000 MT/s, 32-38-38-76 timings and 1.35V.

Επίσης σε αυτό το ράφι