Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two silver and black DDR5 memory modules with RGB lighting

Kingston Technology Corp.

Kingston Technology Corp. Fury Renegade KF560C32RSAK2-96 96GB (2 x 48GB) DDR5 6000 CL32

SKU CH-34GZ-HS04K MPN KF560C32RSAK2-96

A 96 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 latency and RGB lighting

  • Capacity96GB (2 x 48GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL32
  • Timing32-38-38-76
  • Voltage1.35V

LED Color RGB

  • Massive 96 GB capacity across two 48 GB modules
  • DDR5 6000 speed with PC5 48000 bandwidth rating
  • Low CL32 latency and 32-38-38-76 timings for responsive performance
  • Intel XMP 3.0 profile enables one-click overclocking to rated speeds
  • RGB lighting in silver and black design adds visual flair

96GB dual-channel DDR5 kit

This Fury Renegade kit delivers 96GB total capacity through two 48GB modules rated for DDR5-6000 at CL32 32-38-38-76. It runs at 1.35V with Intel XMP 3.0 profiles and includes RGB lighting on silver and black heatsinks.

High-capacity DDR5 for Intel and AMD platforms

The 288-pin modules target workstations and gaming systems using Intel 600, 700 series or AMD 600 series chipsets where 96GB is supported. Builds limited to lower maximum memory per slot or requiring JEDEC-only operation should consider smaller or slower kits.

1.35V XMP 3.0 voltage requirement

Each module is validated at DDR5-6000 CL32 only when the memory controller can supply 1.35V through an enabled XMP 3.0 profile; at default JEDEC settings the SPD programs DDR5-4800 at 40-39-39 and 1.1V.

Ciri-ciri utama

  • Massive 96 GB capacity across two 48 GB modules
  • DDR5 6000 speed with PC5 48000 bandwidth rating
  • Low CL32 latency and 32-38-38-76 timings for responsive performance
  • Intel XMP 3.0 profile enables one-click overclocking to rated speeds
  • RGB lighting in silver and black design adds visual flair

Spesifikasi

BrandKingston
SeriesFury Renegade
ModelKF560C32RSAK2-96
Capacity96GB (2 x 48GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL32
Timing32-38-38-76
Voltage1.35V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorSilver / Black
FeaturesKingston FURY KF560C32RSAK2-96 is a kit of two 6G x 64-bit
(48GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 2Rx8,
memory module, based on sixteen 3G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 3.0. Total kit capacity is 96GB. Each
module has been tested to run at DDR5-6000 at a low latency timing
of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Recommend UseAMD & Intel Compatible / AMD B650 / AMD Ryzen Compatible / AMD X670 / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z690 / Intel Z790
LED ColorRGB
Berat penghantaran0.16 kg
Dimensi bungkusan171 × 130 × 15 mm

Versi lain model ini

1 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What motherboard slot does the 288-pin DDR5 kit require?

The kit fits a standard 288-pin DDR5 DIMM slot on an Intel 600 or 700 series board or an AMD B650 or X670 board.

Will the modules run at their rated 6000 speed on a board that only supports JEDEC DDR5-4800?

By default the SPD is set to 4800 at 1.1V with 40-39-39 timing; enabling the Intel XMP 3.0 profile raises speed to 6000 at 1.35V with 32-38-38-76 timing.

How can I confirm the kit is running at the XMP 6000 CL32 profile after enabling it?

Check the memory tab in CPU-Z or the BIOS main screen; it should show 6000 MT/s, 32-38-38-76 timings and 1.35V.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.