Kingston Technology Corp.
Kingston Technology Corp. Fury Renegade 96GB (2 x 48GB) DDR5 6000 CL32 desktop RAM KF560C32RSK2-96
- 96GB (2 x 48GB)
- 288-Pin PC RAM
705.99 $
0.00913962BTC
במלאי
Kingston Technology Corp.
Kingston Technology Corp. Fury Renegade KF560C32RSAK2-96 96GB (2 x 48GB) DDR5 6000 CL32
A 96 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 latency and RGB lighting
- Capacity96GB (2 x 48GB)
- Type288-Pin PC RAM
- SpeedDDR5 6000 (PC5 48000)
- CAS LatencyCL32
- Timing32-38-38-76
- Voltage1.35V
LED Color RGB
- None
- RGB
- Massive 96 GB capacity across two 48 GB modules
- DDR5 6000 speed with PC5 48000 bandwidth rating
- Low CL32 latency and 32-38-38-76 timings for responsive performance
- Intel XMP 3.0 profile enables one-click overclocking to rated speeds
- RGB lighting in silver and black design adds visual flair
96GB dual-channel DDR5 kit
This Fury Renegade kit delivers 96GB total capacity through two 48GB modules rated for DDR5-6000 at CL32 32-38-38-76. It runs at 1.35V with Intel XMP 3.0 profiles and includes RGB lighting on silver and black heatsinks.
High-capacity DDR5 for Intel and AMD platforms
The 288-pin modules target workstations and gaming systems using Intel 600, 700 series or AMD 600 series chipsets where 96GB is supported. Builds limited to lower maximum memory per slot or requiring JEDEC-only operation should consider smaller or slower kits.
1.35V XMP 3.0 voltage requirement
Each module is validated at DDR5-6000 CL32 only when the memory controller can supply 1.35V through an enabled XMP 3.0 profile; at default JEDEC settings the SPD programs DDR5-4800 at 40-39-39 and 1.1V.
נקודות עיקריות
- Massive 96 GB capacity across two 48 GB modules
- DDR5 6000 speed with PC5 48000 bandwidth rating
- Low CL32 latency and 32-38-38-76 timings for responsive performance
- Intel XMP 3.0 profile enables one-click overclocking to rated speeds
- RGB lighting in silver and black design adds visual flair
מפרט טכני
| Brand | Kingston |
|---|---|
| Series | Fury Renegade |
| Model | KF560C32RSAK2-96 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38-76 |
| Voltage | 1.35V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Silver / Black |
| Features | Kingston FURY KF560C32RSAK2-96 is a kit of two 6G x 64-bit (48GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 3G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 96GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| Recommend Use | AMD & Intel Compatible / AMD B650 / AMD Ryzen Compatible / AMD X670 / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z690 / Intel Z790 |
| LED Color | RGB |
| משקל משלוח | 0.16 kg |
| מידות האריזה | 171 × 130 × 15 mm |
גרסאות נוספות של דגם זה
1 נוספים באותה הסדרה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
שאלות על הפריט הזה
What motherboard slot does the 288-pin DDR5 kit require?
The kit fits a standard 288-pin DDR5 DIMM slot on an Intel 600 or 700 series board or an AMD B650 or X670 board.
Will the modules run at their rated 6000 speed on a board that only supports JEDEC DDR5-4800?
By default the SPD is set to 4800 at 1.1V with 40-39-39 timing; enabling the Intel XMP 3.0 profile raises speed to 6000 at 1.35V with 32-38-38-76 timing.
How can I confirm the kit is running at the XMP 6000 CL32 profile after enabling it?
Check the memory tab in CPU-Z or the BIOS main screen; it should show 6000 MT/s, 32-38-38-76 timings and 1.35V.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00278322BTC
במלאי
