Kingston Technology Corp. Fury Renegade 96GB (2 x 48GB) DDR5 6000 CL32 desktop RAM KF560C32RSK2-96
- 96GB (2 x 48GB)
- 288-Pin PC RAM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
A 96 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 latency and RGB lighting
LED Color RGB
This Fury Renegade kit delivers 96GB total capacity through two 48GB modules rated for DDR5-6000 at CL32 32-38-38-76. It runs at 1.35V with Intel XMP 3.0 profiles and includes RGB lighting on silver and black heatsinks.
The 288-pin modules target workstations and gaming systems using Intel 600, 700 series or AMD 600 series chipsets where 96GB is supported. Builds limited to lower maximum memory per slot or requiring JEDEC-only operation should consider smaller or slower kits.
Each module is validated at DDR5-6000 CL32 only when the memory controller can supply 1.35V through an enabled XMP 3.0 profile; at default JEDEC settings the SPD programs DDR5-4800 at 40-39-39 and 1.1V.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade |
| Model | KF560C32RSAK2-96 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38-76 |
| Voltage | 1.35V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Silver / Black |
| Features | Kingston FURY KF560C32RSAK2-96 is a kit of two 6G x 64-bit (48GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 3G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 96GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| Recommend Use | AMD & Intel Compatible / AMD B650 / AMD Ryzen Compatible / AMD X670 / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z690 / Intel Z790 |
| LED Color | RGB |
| وزن الشحنة | 0.16 kg |
| أبعاد الطرد | 171 × 130 × 15 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The kit fits a standard 288-pin DDR5 DIMM slot on an Intel 600 or 700 series board or an AMD B650 or X670 board.
By default the SPD is set to 4800 at 1.1V with 40-39-39 timing; enabling the Intel XMP 3.0 profile raises speed to 6000 at 1.35V with 32-38-38-76 timing.
Check the memory tab in CPU-Z or the BIOS main screen; it should show 6000 MT/s, 32-38-38-76 timings and 1.35V.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟