Metal vertical NAS case holding two 2.5 SSDs and a Raspberry Pi board

LORDWORLD

LORDWORLD Dual 2.5 SSD NAS Case for Raspberry Pi 5/4/3/2B

SKU CH-3ADC-07JBD

A vertical metal case that holds two 2.5 SSDs and a Raspberry Pi board for network-attached storage

Supports dual 2.5 SSDs for expanded Raspberry Pi storage
Compatible with Pi 5, 4, 3B/3B+ and 2B models
Tool-free SSD mounting with included screws and base
Vertical metal stand saves desk space and aids cooling
Assembly manual included for quick first-time setup

28,99 $

0.00037088 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 370,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Dual 2.5 SSD NAS Case for Raspberry Pi

This LORDWORLD metal vertical stand converts a Raspberry Pi into a network-attached storage device. It accepts two 2.5-inch SSDs of either 7 mm or 9 mm thickness and fits Pi 4B, 3B+, 3B and 2B boards. The kit includes all mounting hardware and an assembly manual.

Makers building compact file servers

The case suits hobbyists and developers who want local storage attached directly to a single-board computer without extra cables. Builders who need more than two drives or a different form factor should look elsewhere.

Supports two 2.5 SSDs (7 mm/9 mm)

Capacity is defined by the two drive bays, each taking a standard 2.5 SSD up to 9 mm thick. The vertical metal chassis keeps the drives and the Pi board aligned for a tidy, space-saving NAS build.

Βασικά χαρακτηριστικά

Supports dual 2.5 SSDs for expanded Raspberry Pi storage
Compatible with Pi 5, 4, 3B/3B+ and 2B models
Tool-free SSD mounting with included screws and base
Vertical metal stand saves desk space and aids cooling
Assembly manual included for quick first-time setup

Προδιαγραφές

Brand	LORDWORLD

Ερωτήσεις για αυτό το προϊόν

Will the dual 2.5 SSDs and Raspberry Pi stay cool when the NAS runs continuously?

The metal vertical stand acts as a heatsink for the drives and the Pi, and the open frame lets air circulate around both SSDs and the board during all-day operation.

What Raspberry Pi board and drives do I need to have before this case becomes a working NAS?

You must supply a Raspberry Pi 4B, 3B+, 3B or 2B plus one or two 2.5 SSDs in 7 mm or 9 mm height; the kit includes only the case, screws and manual.

Can I keep using my older Raspberry Pi 2B with this case alongside a newer Pi 4B?

Yes, the case fits Pi 2B, 3B, 3B+ and 4B, so you can swap boards without changing the enclosure or drive mounting.

Επίσης σε αυτό το ράφι