暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Metal vertical NAS case holding two 2.5 SSDs and a Raspberry Pi board

LORDWORLD

LORDWORLD Dual 2.5 SSD NAS Case for Raspberry Pi 5/4/3/2B

SKU CH-3ADC-07JBD

A vertical metal case that holds two 2.5 SSDs and a Raspberry Pi board for network-attached storage

  • Supports dual 2.5 SSDs for expanded Raspberry Pi storage
  • Compatible with Pi 5, 4, 3B/3B+ and 2B models
  • Tool-free SSD mounting with included screws and base
  • Vertical metal stand saves desk space and aids cooling
  • Assembly manual included for quick first-time setup

Dual 2.5 SSD NAS Case for Raspberry Pi

This LORDWORLD metal vertical stand converts a Raspberry Pi into a network-attached storage device. It accepts two 2.5-inch SSDs of either 7 mm or 9 mm thickness and fits Pi 4B, 3B+, 3B and 2B boards. The kit includes all mounting hardware and an assembly manual.

Makers building compact file servers

The case suits hobbyists and developers who want local storage attached directly to a single-board computer without extra cables. Builders who need more than two drives or a different form factor should look elsewhere.

Supports two 2.5 SSDs (7 mm/9 mm)

Capacity is defined by the two drive bays, each taking a standard 2.5 SSD up to 9 mm thick. The vertical metal chassis keeps the drives and the Pi board aligned for a tidy, space-saving NAS build.

特長

  • Supports dual 2.5 SSDs for expanded Raspberry Pi storage
  • Compatible with Pi 5, 4, 3B/3B+ and 2B models
  • Tool-free SSD mounting with included screws and base
  • Vertical metal stand saves desk space and aids cooling
  • Assembly manual included for quick first-time setup

仕様

BrandLORDWORLD

この商品に関する質問

Will the dual 2.5 SSDs and Raspberry Pi stay cool when the NAS runs continuously?

The metal vertical stand acts as a heatsink for the drives and the Pi, and the open frame lets air circulate around both SSDs and the board during all-day operation.

What Raspberry Pi board and drives do I need to have before this case becomes a working NAS?

You must supply a Raspberry Pi 4B, 3B+, 3B or 2B plus one or two 2.5 SSDs in 7 mm or 9 mm height; the kit includes only the case, screws and manual.

Can I keep using my older Raspberry Pi 2B with this case alongside a newer Pi 4B?

Yes, the case fits Pi 2B, 3B, 3B+ and 4B, so you can swap boards without changing the enclosure or drive mounting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。