Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Metal vertical NAS case holding two 2.5 SSDs and a Raspberry Pi board

LORDWORLD

LORDWORLD Dual 2.5 SSD NAS Case for Raspberry Pi 5/4/3/2B

SKU CH-3ADC-07JBD

A vertical metal case that holds two 2.5 SSDs and a Raspberry Pi board for network-attached storage

  • Supports dual 2.5 SSDs for expanded Raspberry Pi storage
  • Compatible with Pi 5, 4, 3B/3B+ and 2B models
  • Tool-free SSD mounting with included screws and base
  • Vertical metal stand saves desk space and aids cooling
  • Assembly manual included for quick first-time setup

Dual 2.5 SSD NAS Case for Raspberry Pi

This LORDWORLD metal vertical stand converts a Raspberry Pi into a network-attached storage device. It accepts two 2.5-inch SSDs of either 7 mm or 9 mm thickness and fits Pi 4B, 3B+, 3B and 2B boards. The kit includes all mounting hardware and an assembly manual.

Makers building compact file servers

The case suits hobbyists and developers who want local storage attached directly to a single-board computer without extra cables. Builders who need more than two drives or a different form factor should look elsewhere.

Supports two 2.5 SSDs (7 mm/9 mm)

Capacity is defined by the two drive bays, each taking a standard 2.5 SSD up to 9 mm thick. The vertical metal chassis keeps the drives and the Pi board aligned for a tidy, space-saving NAS build.

Prednosti

  • Supports dual 2.5 SSDs for expanded Raspberry Pi storage
  • Compatible with Pi 5, 4, 3B/3B+ and 2B models
  • Tool-free SSD mounting with included screws and base
  • Vertical metal stand saves desk space and aids cooling
  • Assembly manual included for quick first-time setup

Špecifikácie

BrandLORDWORLD

Otázky k tomuto produktu

Will the dual 2.5 SSDs and Raspberry Pi stay cool when the NAS runs continuously?

The metal vertical stand acts as a heatsink for the drives and the Pi, and the open frame lets air circulate around both SSDs and the board during all-day operation.

What Raspberry Pi board and drives do I need to have before this case becomes a working NAS?

You must supply a Raspberry Pi 4B, 3B+, 3B or 2B plus one or two 2.5 SSDs in 7 mm or 9 mm height; the kit includes only the case, screws and manual.

Can I keep using my older Raspberry Pi 2B with this case alongside a newer Pi 4B?

Yes, the case fits Pi 2B, 3B, 3B+ and 4B, so you can swap boards without changing the enclosure or drive mounting.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.