저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Metal vertical NAS case holding two 2.5 SSDs and a Raspberry Pi board

LORDWORLD

LORDWORLD Dual 2.5 SSD NAS Case for Raspberry Pi 5/4/3/2B

SKU CH-3ADC-07JBD

A vertical metal case that holds two 2.5 SSDs and a Raspberry Pi board for network-attached storage

  • Supports dual 2.5 SSDs for expanded Raspberry Pi storage
  • Compatible with Pi 5, 4, 3B/3B+ and 2B models
  • Tool-free SSD mounting with included screws and base
  • Vertical metal stand saves desk space and aids cooling
  • Assembly manual included for quick first-time setup

Dual 2.5 SSD NAS Case for Raspberry Pi

This LORDWORLD metal vertical stand converts a Raspberry Pi into a network-attached storage device. It accepts two 2.5-inch SSDs of either 7 mm or 9 mm thickness and fits Pi 4B, 3B+, 3B and 2B boards. The kit includes all mounting hardware and an assembly manual.

Makers building compact file servers

The case suits hobbyists and developers who want local storage attached directly to a single-board computer without extra cables. Builders who need more than two drives or a different form factor should look elsewhere.

Supports two 2.5 SSDs (7 mm/9 mm)

Capacity is defined by the two drive bays, each taking a standard 2.5 SSD up to 9 mm thick. The vertical metal chassis keeps the drives and the Pi board aligned for a tidy, space-saving NAS build.

주요 특징

  • Supports dual 2.5 SSDs for expanded Raspberry Pi storage
  • Compatible with Pi 5, 4, 3B/3B+ and 2B models
  • Tool-free SSD mounting with included screws and base
  • Vertical metal stand saves desk space and aids cooling
  • Assembly manual included for quick first-time setup

사양

BrandLORDWORLD

이 상품에 대한 질문

Will the dual 2.5 SSDs and Raspberry Pi stay cool when the NAS runs continuously?

The metal vertical stand acts as a heatsink for the drives and the Pi, and the open frame lets air circulate around both SSDs and the board during all-day operation.

What Raspberry Pi board and drives do I need to have before this case becomes a working NAS?

You must supply a Raspberry Pi 4B, 3B+, 3B or 2B plus one or two 2.5 SSDs in 7 mm or 9 mm height; the kit includes only the case, screws and manual.

Can I keep using my older Raspberry Pi 2B with this case alongside a newer Pi 4B?

Yes, the case fits Pi 2B, 3B, 3B+ and 4B, so you can swap boards without changing the enclosure or drive mounting.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.