Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Compact black adapter with USB-C cable and blue LED indicator

LORDWORLD

LORDWORLD USB 3.2 Gen 2 10Gbps 2.5" SATA M.2 NVMe Adapter

SKU CH-77FC-Z081Q

Connects a 2.5 SATA drive or M.2 SATA/NVMe SSD via USB 3.2 Gen 2 at up to 10Gbps with tool-less installation and UASP support

  • Transfer at up to 10 Gbps with USB 3.2 Gen 2
  • Read 2.5 SATA and M.2 NVMe drives via one adapter
  • Install drives without tools for fast swaps
  • UASP and TRIM support keep performance consistent
  • Blue LED shows drive activity at a glance

What this adapter does

The LORDWORLD adapter lets you connect one 2.5-inch SATA drive or one M.2 SATA or NVMe drive to a USB 3.2 Gen 2 port at up to 10Gbps. It is built for quick data recovery, drive cloning or temporary external storage. A tool-less design means you can swap drives without screws or a separate enclosure.

What to verify before buying

Your host must provide a USB 3.2 Gen 2 port to reach the stated 10Gbps ceiling; slower ports will work but reduce throughput. The adapter accepts only one drive at a time, so you cannot run a 2.5-inch drive and an M.2 drive together. Confirm your M.2 module uses the M-key or B+M key pin-out, because other keyings will not fit.

Behaviour during long transfers

Sustained speeds depend on the drive's own write performance and the host controller's thermal limits rather than the adapter alone. The blue activity LED shows when data moves, helping you confirm the link stays active during large copies. UASP and TRIM support keep command overhead low, so the adapter does not become a bottleneck once the drive settles into its steady state.

Βασικά χαρακτηριστικά

  • Transfer at up to 10 Gbps with USB 3.2 Gen 2
  • Read 2.5 SATA and M.2 NVMe drives via one adapter
  • Install drives without tools for fast swaps
  • UASP and TRIM support keep performance consistent
  • Blue LED shows drive activity at a glance

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

Does the adapter include any cables or drives, or do I need to buy them separately?

The adapter ships without cables or drives; you must supply your own USB 3.2 Gen 2 cable and a 2.5" SATA or M.2 SATA/NVMe SSD.

Should I choose a 2.5" SATA drive or an M.2 NVMe drive for this adapter?

Both form factors work, but only one drive can be used at a time; pick the drive type you already own or need for your laptop upgrade.

Will I actually see 10Gbps transfer speeds when the adapter is connected to my PC?

The 10Gbps ceiling requires a USB 3.2 Gen 2 host port and a drive that can saturate the link; real-world speed depends on both.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.