Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Compact black adapter with USB-C cable and blue LED indicator

LORDWORLD

LORDWORLD USB 3.2 Gen 2 10Gbps 2.5" SATA M.2 NVMe Adapter

SKU CH-77FC-Z081Q

Connects a 2.5 SATA drive or M.2 SATA/NVMe SSD via USB 3.2 Gen 2 at up to 10Gbps with tool-less installation and UASP support

  • Transfer at up to 10 Gbps with USB 3.2 Gen 2
  • Read 2.5 SATA and M.2 NVMe drives via one adapter
  • Install drives without tools for fast swaps
  • UASP and TRIM support keep performance consistent
  • Blue LED shows drive activity at a glance

What this adapter does

The LORDWORLD adapter lets you connect one 2.5-inch SATA drive or one M.2 SATA or NVMe drive to a USB 3.2 Gen 2 port at up to 10Gbps. It is built for quick data recovery, drive cloning or temporary external storage. A tool-less design means you can swap drives without screws or a separate enclosure.

What to verify before buying

Your host must provide a USB 3.2 Gen 2 port to reach the stated 10Gbps ceiling; slower ports will work but reduce throughput. The adapter accepts only one drive at a time, so you cannot run a 2.5-inch drive and an M.2 drive together. Confirm your M.2 module uses the M-key or B+M key pin-out, because other keyings will not fit.

Behaviour during long transfers

Sustained speeds depend on the drive's own write performance and the host controller's thermal limits rather than the adapter alone. The blue activity LED shows when data moves, helping you confirm the link stays active during large copies. UASP and TRIM support keep command overhead low, so the adapter does not become a bottleneck once the drive settles into its steady state.

Najważniejsze cechy

  • Transfer at up to 10 Gbps with USB 3.2 Gen 2
  • Read 2.5 SATA and M.2 NVMe drives via one adapter
  • Install drives without tools for fast swaps
  • UASP and TRIM support keep performance consistent
  • Blue LED shows drive activity at a glance

Specyfikacja

BrandLORDWORLD

Pytania dotyczące tego produktu

Does the adapter include any cables or drives, or do I need to buy them separately?

The adapter ships without cables or drives; you must supply your own USB 3.2 Gen 2 cable and a 2.5" SATA or M.2 SATA/NVMe SSD.

Should I choose a 2.5" SATA drive or an M.2 NVMe drive for this adapter?

Both form factors work, but only one drive can be used at a time; pick the drive type you already own or need for your laptop upgrade.

Will I actually see 10Gbps transfer speeds when the adapter is connected to my PC?

The 10Gbps ceiling requires a USB 3.2 Gen 2 host port and a drive that can saturate the link; real-world speed depends on both.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.