Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Gray thermal paste in a 2g syringe tube

PCCOOLER

PCCOOLER GT-10 (2g) Thermal Paste 13.6 W/mK

SKU CH-CQ6J-1Q64Y

High-conductivity 13.6 W/mK thermal paste for CPU or GPU, non-conductive and stable from -50 to 250 °C

  • Thermal Conductivity13.6 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

GT-10 2 g thermal paste

The PCCOOLER GT-10 is a 2 g syringe of non-conductive thermal compound rated at 13.6 W/mK. It is intended for PC builders and technicians who need reliable heat transfer between a CPU or GPU and its cooler. The grey paste uses a nano-diamond formulation that resists oxidation and corrosion over long service intervals. Its non-electrically conductive nature removes the risk of short circuits if excess material spreads beyond the die.

Practical limits of the thermal interface

Thermal impedance is specified at 0.03 cm²/W, defining the resistance the layer adds between surfaces. The compound remains stable across a working range of -50 °C to 250 °C, covering extreme overclocking and sub-ambient cooling scenarios. Specific gravity of 2.6 g/cm³ gives the paste a consistent viscosity for even spreading without pump-out during thermal cycling. These parameters set the boundaries for reliable operation in standard air- and liquid-cooled builds.

Deciding specification: 13.6 W/mK conductivity

The single figure that determines suitability is the 13.6 W/mK thermal conductivity rating. Builders targeting high-heat-load CPUs or GPUs should compare this value against their cooler's requirements and the typical conductivity of alternatives they are considering. Buyers who need a larger volume for multiple applications or system integrators assembling many units will find the 2 g package insufficient for repeated use. No other specification overrides this conductivity number for matching the paste to the thermal load.

Βασικά χαρακτηριστικά

  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

Προδιαγραφές

BrandPCCOOLER
SeriesGT
ModelGT-10(2g)
Part NumberAGT-GT102G-GL
Thermal Conductivity13.6 W/mK
Long Term Operating Temperature-50 to 250 C

Ερωτήσεις για αυτό το προϊόν

Is the 2 g syringe enough for a single CPU application or multiple builds?

The 2 g syringe covers several CPU applications; typical use needs only a pea-sized drop per install.

What does the 13.6 W/mK conductivity figure mean for actual CPU temperatures?

At 13.6 W/mK the paste moves heat from the die to the cooler efficiently, helping lower core temperatures under load.

How does the non-conductive, non-corrosive formula affect installation safety?

Being non-conductive and non-corrosive, it poses no short-circuit risk if it contacts nearby components.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.