نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Gray thermal paste in a 2g syringe tube

PCCOOLER

PCCOOLER GT-10 (2g) Thermal Paste 13.6 W/mK

SKU CH-CQ6J-1Q64Y

High-conductivity 13.6 W/mK thermal paste for CPU or GPU, non-conductive and stable from -50 to 250 °C

  • Thermal Conductivity13.6 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

GT-10 2 g thermal paste

The PCCOOLER GT-10 is a 2 g syringe of non-conductive thermal compound rated at 13.6 W/mK. It is intended for PC builders and technicians who need reliable heat transfer between a CPU or GPU and its cooler. The grey paste uses a nano-diamond formulation that resists oxidation and corrosion over long service intervals. Its non-electrically conductive nature removes the risk of short circuits if excess material spreads beyond the die.

Practical limits of the thermal interface

Thermal impedance is specified at 0.03 cm²/W, defining the resistance the layer adds between surfaces. The compound remains stable across a working range of -50 °C to 250 °C, covering extreme overclocking and sub-ambient cooling scenarios. Specific gravity of 2.6 g/cm³ gives the paste a consistent viscosity for even spreading without pump-out during thermal cycling. These parameters set the boundaries for reliable operation in standard air- and liquid-cooled builds.

Deciding specification: 13.6 W/mK conductivity

The single figure that determines suitability is the 13.6 W/mK thermal conductivity rating. Builders targeting high-heat-load CPUs or GPUs should compare this value against their cooler's requirements and the typical conductivity of alternatives they are considering. Buyers who need a larger volume for multiple applications or system integrators assembling many units will find the 2 g package insufficient for repeated use. No other specification overrides this conductivity number for matching the paste to the thermal load.

أبرز المميزات

  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

المواصفات

BrandPCCOOLER
SeriesGT
ModelGT-10(2g)
Part NumberAGT-GT102G-GL
Thermal Conductivity13.6 W/mK
Long Term Operating Temperature-50 to 250 C

أسئلة حول هذا المنتج

Is the 2 g syringe enough for a single CPU application or multiple builds?

The 2 g syringe covers several CPU applications; typical use needs only a pea-sized drop per install.

What does the 13.6 W/mK conductivity figure mean for actual CPU temperatures?

At 13.6 W/mK the paste moves heat from the die to the cooler efficiently, helping lower core temperatures under load.

How does the non-conductive, non-corrosive formula affect installation safety?

Being non-conductive and non-corrosive, it poses no short-circuit risk if it contacts nearby components.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.