Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Gray thermal paste in a 2g syringe tube

PCCOOLER

PCCOOLER GT-10 (2g) Thermal Paste 13.6 W/mK

SKU CH-CQ6J-1Q64Y

High-conductivity 13.6 W/mK thermal paste for CPU or GPU, non-conductive and stable from -50 to 250 °C

  • Thermal Conductivity13.6 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

GT-10 2 g thermal paste

The PCCOOLER GT-10 is a 2 g syringe of non-conductive thermal compound rated at 13.6 W/mK. It is intended for PC builders and technicians who need reliable heat transfer between a CPU or GPU and its cooler. The grey paste uses a nano-diamond formulation that resists oxidation and corrosion over long service intervals. Its non-electrically conductive nature removes the risk of short circuits if excess material spreads beyond the die.

Practical limits of the thermal interface

Thermal impedance is specified at 0.03 cm²/W, defining the resistance the layer adds between surfaces. The compound remains stable across a working range of -50 °C to 250 °C, covering extreme overclocking and sub-ambient cooling scenarios. Specific gravity of 2.6 g/cm³ gives the paste a consistent viscosity for even spreading without pump-out during thermal cycling. These parameters set the boundaries for reliable operation in standard air- and liquid-cooled builds.

Deciding specification: 13.6 W/mK conductivity

The single figure that determines suitability is the 13.6 W/mK thermal conductivity rating. Builders targeting high-heat-load CPUs or GPUs should compare this value against their cooler's requirements and the typical conductivity of alternatives they are considering. Buyers who need a larger volume for multiple applications or system integrators assembling many units will find the 2 g package insufficient for repeated use. No other specification overrides this conductivity number for matching the paste to the thermal load.

Puncte forte

  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

Specificații

BrandPCCOOLER
SeriesGT
ModelGT-10(2g)
Part NumberAGT-GT102G-GL
Thermal Conductivity13.6 W/mK
Long Term Operating Temperature-50 to 250 C

Întrebări despre acest articol

Is the 2 g syringe enough for a single CPU application or multiple builds?

The 2 g syringe covers several CPU applications; typical use needs only a pea-sized drop per install.

What does the 13.6 W/mK conductivity figure mean for actual CPU temperatures?

At 13.6 W/mK the paste moves heat from the die to the cooler efficiently, helping lower core temperatures under load.

How does the non-conductive, non-corrosive formula affect installation safety?

Being non-conductive and non-corrosive, it poses no short-circuit risk if it contacts nearby components.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.