Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Gray thermal paste in a 2g syringe tube

PCCOOLER

PCCOOLER GT-10 (2g) Thermal Paste 13.6 W/mK

SKU CH-CQ6J-1Q64Y

High-conductivity 13.6 W/mK thermal paste for CPU or GPU, non-conductive and stable from -50 to 250 °C

  • Thermal Conductivity13.6 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

GT-10 2 g thermal paste

The PCCOOLER GT-10 is a 2 g syringe of non-conductive thermal compound rated at 13.6 W/mK. It is intended for PC builders and technicians who need reliable heat transfer between a CPU or GPU and its cooler. The grey paste uses a nano-diamond formulation that resists oxidation and corrosion over long service intervals. Its non-electrically conductive nature removes the risk of short circuits if excess material spreads beyond the die.

Practical limits of the thermal interface

Thermal impedance is specified at 0.03 cm²/W, defining the resistance the layer adds between surfaces. The compound remains stable across a working range of -50 °C to 250 °C, covering extreme overclocking and sub-ambient cooling scenarios. Specific gravity of 2.6 g/cm³ gives the paste a consistent viscosity for even spreading without pump-out during thermal cycling. These parameters set the boundaries for reliable operation in standard air- and liquid-cooled builds.

Deciding specification: 13.6 W/mK conductivity

The single figure that determines suitability is the 13.6 W/mK thermal conductivity rating. Builders targeting high-heat-load CPUs or GPUs should compare this value against their cooler's requirements and the typical conductivity of alternatives they are considering. Buyers who need a larger volume for multiple applications or system integrators assembling many units will find the 2 g package insufficient for repeated use. No other specification overrides this conductivity number for matching the paste to the thermal load.

Punti di forza

  • High thermal conductivity of 13.6 W/mK for efficient heat transfer
  • Low thermal impedance of 0.03 cm²/W improves contact performance
  • Non-conductive formula prevents electrical short circuits on components
  • Wide operating range from -50 °C to 250 °C suits extreme conditions
  • Anti-oxidation and non-corrosive properties maintain long-term stability

Caratteristiche tecniche

BrandPCCOOLER
SeriesGT
ModelGT-10(2g)
Part NumberAGT-GT102G-GL
Thermal Conductivity13.6 W/mK
Long Term Operating Temperature-50 to 250 C

Domande su questo articolo

Is the 2 g syringe enough for a single CPU application or multiple builds?

The 2 g syringe covers several CPU applications; typical use needs only a pea-sized drop per install.

What does the 13.6 W/mK conductivity figure mean for actual CPU temperatures?

At 13.6 W/mK the paste moves heat from the die to the cooler efficiently, helping lower core temperatures under load.

How does the non-conductive, non-corrosive formula affect installation safety?

Being non-conductive and non-corrosive, it poses no short-circuit risk if it contacts nearby components.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.