Silverstone SST-AR09-115XP 60mm 2 Ball CPU Cooler
- Black
- Fan & Heatsinks
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Silverstone
Compact 60mm dual ball-bearing PWM cooler with three 6mm copper heat-pipes and aluminium fins, fits Intel LGA 1150/1151/1155/1156 sockets in a 66mm height
Model AR09-115XS
The Silverstone Argon SST-AR09-115XS is a low-profile air cooler built for Intel LGA 1150, 1151, 1155 and 1156 sockets. Three 6 mm copper heat-pipes make direct contact with the CPU lid, moving heat into a dense aluminium fin stack. A 60 mm dual ball-bearing PWM fan spins between 1200 and 5000 RPM to match thermal load.
The fan mounts vertically above the heatsink, drawing air down through the fins and exhausting it toward the motherboard. This orientation keeps the overall height at 66 mm, leaving clearance for slim cases or tight component spacing. Spring-screw brackets with a backplate secure the unit without needing access to the rear of the board.
The bundled spring-screw bracket and backplane apply even pressure across the heat-pipes, improving contact consistency on the supported LGA 115x platforms. Dual ball bearings in the fan motor extend service life compared with sleeve alternatives. No additional brackets or adapters are included for other socket families.
| Brand | SILVERSTONE |
|---|---|
| Series | Argon Series |
| Model | SST-AR09-115XS |
| Color | Black |
| Type | Fan & Heatsinks |
| Fan Size | 60mm |
| CPU Socket Compatibility | Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 |
| Bearing Type | 2 Ball |
| RPM | 1200 - 5000 RPM |
| Air Flow | 6.7 - 27.9 CFM |
| Noise Level | 18.02 - 42.5 dBA |
| Heatsink Material | Copper heat pipes with aluminum fins |
| Fan Mounting Types to Heatsink | Vertical |
| Max CPU Cooler Height | 66 mm |
| Fan Dimensions | 60.00mm x 60.00mm x 25.00mm |
| Heatsink Dimensions | 88.00m x 66.00mm x 88.00mm (w/ Fan) |
| Weight | 0.65 lbs. w/o fan |
| Features | Three 6mm heat-pipes and aluminum fins for excellent heat conducting efficiency Heat-pipe direct contact (HDC) technology 60mm dual ball bearing PWM fan Includes spring screw bracket with backplane Intel LGA1150/1151/1155/1156 compatible |
| Βάρος αποστολής | 0.42 kg |
| Διαστάσεις συσκευασίας | 119 × 109 × 107 mm |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The cooler stands 66 mm tall, so any component taller than that will interfere; measure your tallest module before installing.
At maximum speed the fan reaches 42.5 dBA, which is audible in a quiet room but typical for a compact 60 mm cooler.
The mounting kit covers LGA 1150, 1151, 1155 and 1156; no additional hardware is needed for those platforms.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;