SMUGDESK
SMUGDESK MCIO 4X to U.2 SFF-8639 NVMe PCIe Cable 5.0 15Pin SATA Power
Connects an MCIO 4X port to a U.2 NVMe SSD with PCIe 5.0 support and integrated 15Pin SATA power
- Direct MCIO 4X to U.2 NVMe connection via SFF-8639
- PCIe 5.0 bandwidth up to 32GT/s for fast data transfer
- Integrated 15Pin SATA power supplies U.2 SSD without extra adapter
- Gold-plated connectors and pure copper ensure durable server-grade signal integrity
- Compatible with motherboards, servers and NAS for high-capacity NVMe expansion
MCIO 4X to U.2 NVMe Adapter
This adapter cable converts an MCIO 4X port on a motherboard or controller card into a U.2 SFF-8639 connection for NVMe SSDs. It is built for enterprise servers, NAS systems and data centre storage expansion where high-capacity U.2 drives are preferred. The integrated 15Pin SATA power lead supplies the drive directly without extra adapters. Gold-plated contacts and a braided jacket protect signal integrity in demanding environments.
PCIe 5.0 Bandwidth Upgrade
The cable carries PCIe 3.0, 4.0 and 5.0 x4 signalling up to 32GT/s, so a Gen 5 SSD runs at full speed when the host port supports it. Upgrading from a Gen 3 or Gen 4 link is worthwhile only when the platform and drive both support the higher generation. If the host side is limited to Gen 3, the cable will still work but the drive will operate at Gen 3 speeds. No performance gain appears unless every link in the chain matches the target generation.
Host Port and Power Check
Verify that the host system provides an MCIO 4X (38Pin SFF-TA-1016) connector wired for PCIe x4 and that the power supply has a free SATA power connector for the 15Pin lead. The U.2 SSD must be a 2.5-inch NVMe model with an SFF-8639 interface; SATA-only U.2 drives are not supported. Confirm physical clearance for the cable routing and drive mounting before ordering.
Βασικά χαρακτηριστικά
- Direct MCIO 4X to U.2 NVMe connection via SFF-8639
- PCIe 5.0 bandwidth up to 32GT/s for fast data transfer
- Integrated 15Pin SATA power supplies U.2 SSD without extra adapter
- Gold-plated connectors and pure copper ensure durable server-grade signal integrity
- Compatible with motherboards, servers and NAS for high-capacity NVMe expansion
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
What motherboard port does the MCIO 4X connector fit?
It plugs into a 38Pin SFF-TA-1016 MCIO 4X slot on the motherboard or controller card.
How do I connect the power cable, and what step is often missed?
Attach the 15Pin SATA power lead to your PSU; the common mistake is leaving it unplugged, which leaves the U.2 SSD without power.
What upkeep will the cable need over time?
No routine maintenance is required; inspect the gold-plated connectors and braided jacket occasionally for physical damage.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



