暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
MCIO 4X to U.2 SFF-8639 NVMe cable with 15-pin SATA power connector

SMUGDESK

SMUGDESK MCIO 4X to U.2 SFF-8639 NVMe PCIe Cable 5.0 15Pin SATA Power

SKU CH-70ZD-8ZSTN

Connects an MCIO 4X port to a U.2 NVMe SSD with PCIe 5.0 support and integrated 15Pin SATA power

  • Direct MCIO 4X to U.2 NVMe connection via SFF-8639
  • PCIe 5.0 bandwidth up to 32GT/s for fast data transfer
  • Integrated 15Pin SATA power supplies U.2 SSD without extra adapter
  • Gold-plated connectors and pure copper ensure durable server-grade signal integrity
  • Compatible with motherboards, servers and NAS for high-capacity NVMe expansion

MCIO 4X to U.2 NVMe Adapter

This adapter cable converts an MCIO 4X port on a motherboard or controller card into a U.2 SFF-8639 connection for NVMe SSDs. It is built for enterprise servers, NAS systems and data centre storage expansion where high-capacity U.2 drives are preferred. The integrated 15Pin SATA power lead supplies the drive directly without extra adapters. Gold-plated contacts and a braided jacket protect signal integrity in demanding environments.

PCIe 5.0 Bandwidth Upgrade

The cable carries PCIe 3.0, 4.0 and 5.0 x4 signalling up to 32GT/s, so a Gen 5 SSD runs at full speed when the host port supports it. Upgrading from a Gen 3 or Gen 4 link is worthwhile only when the platform and drive both support the higher generation. If the host side is limited to Gen 3, the cable will still work but the drive will operate at Gen 3 speeds. No performance gain appears unless every link in the chain matches the target generation.

Host Port and Power Check

Verify that the host system provides an MCIO 4X (38Pin SFF-TA-1016) connector wired for PCIe x4 and that the power supply has a free SATA power connector for the 15Pin lead. The U.2 SSD must be a 2.5-inch NVMe model with an SFF-8639 interface; SATA-only U.2 drives are not supported. Confirm physical clearance for the cable routing and drive mounting before ordering.

特長

  • Direct MCIO 4X to U.2 NVMe connection via SFF-8639
  • PCIe 5.0 bandwidth up to 32GT/s for fast data transfer
  • Integrated 15Pin SATA power supplies U.2 SSD without extra adapter
  • Gold-plated connectors and pure copper ensure durable server-grade signal integrity
  • Compatible with motherboards, servers and NAS for high-capacity NVMe expansion

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What motherboard port does the MCIO 4X connector fit?

It plugs into a 38Pin SFF-TA-1016 MCIO 4X slot on the motherboard or controller card.

How do I connect the power cable, and what step is often missed?

Attach the 15Pin SATA power lead to your PSU; the common mistake is leaving it unplugged, which leaves the U.2 SSD without power.

What upkeep will the cable need over time?

No routine maintenance is required; inspect the gold-plated connectors and braided jacket occasionally for physical damage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。