Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
MCIO 4X to U.2 SFF-8639 NVMe cable with 15-pin SATA power connector

SMUGDESK

SMUGDESK MCIO 4X to U.2 SFF-8639 NVMe PCIe Cable 5.0 15Pin SATA Power

SKU CH-70ZD-8ZSTN

Connects an MCIO 4X port to a U.2 NVMe SSD with PCIe 5.0 support and integrated 15Pin SATA power

  • Direct MCIO 4X to U.2 NVMe connection via SFF-8639
  • PCIe 5.0 bandwidth up to 32GT/s for fast data transfer
  • Integrated 15Pin SATA power supplies U.2 SSD without extra adapter
  • Gold-plated connectors and pure copper ensure durable server-grade signal integrity
  • Compatible with motherboards, servers and NAS for high-capacity NVMe expansion

MCIO 4X to U.2 NVMe Adapter

This adapter cable converts an MCIO 4X port on a motherboard or controller card into a U.2 SFF-8639 connection for NVMe SSDs. It is built for enterprise servers, NAS systems and data centre storage expansion where high-capacity U.2 drives are preferred. The integrated 15Pin SATA power lead supplies the drive directly without extra adapters. Gold-plated contacts and a braided jacket protect signal integrity in demanding environments.

PCIe 5.0 Bandwidth Upgrade

The cable carries PCIe 3.0, 4.0 and 5.0 x4 signalling up to 32GT/s, so a Gen 5 SSD runs at full speed when the host port supports it. Upgrading from a Gen 3 or Gen 4 link is worthwhile only when the platform and drive both support the higher generation. If the host side is limited to Gen 3, the cable will still work but the drive will operate at Gen 3 speeds. No performance gain appears unless every link in the chain matches the target generation.

Host Port and Power Check

Verify that the host system provides an MCIO 4X (38Pin SFF-TA-1016) connector wired for PCIe x4 and that the power supply has a free SATA power connector for the 15Pin lead. The U.2 SSD must be a 2.5-inch NVMe model with an SFF-8639 interface; SATA-only U.2 drives are not supported. Confirm physical clearance for the cable routing and drive mounting before ordering.

Kohokohdat

  • Direct MCIO 4X to U.2 NVMe connection via SFF-8639
  • PCIe 5.0 bandwidth up to 32GT/s for fast data transfer
  • Integrated 15Pin SATA power supplies U.2 SSD without extra adapter
  • Gold-plated connectors and pure copper ensure durable server-grade signal integrity
  • Compatible with motherboards, servers and NAS for high-capacity NVMe expansion

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What motherboard port does the MCIO 4X connector fit?

It plugs into a 38Pin SFF-TA-1016 MCIO 4X slot on the motherboard or controller card.

How do I connect the power cable, and what step is often missed?

Attach the 15Pin SATA power lead to your PSU; the common mistake is leaving it unplugged, which leaves the U.2 SSD without power.

What upkeep will the cable need over time?

No routine maintenance is required; inspect the gold-plated connectors and braided jacket occasionally for physical damage.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.