STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
STARTECH
Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation
Model 2 x 2.5in (Tool-less)
Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.
Option 1 x 3.5in
The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.
Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.
Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET225PT |
| Color | Black |
| Conversion Tray | 2 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | Multi 2.5" Drives to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Multiple Drives |
| Compatible Products | 2.5" |
| Specifications | Compatible Drive Types (Type and Rate): SATA & IDE Drive Installation: Fixed Drive Size: 2.5in Number of 2.5 inch bays 2 Supported Drive Height(s): 5mm 7mm 9.5mm 12.5mm |
| Features | Install two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer Tool-free 2-drive adapter bracket 2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter Supports 2.5in drives 5mm to 12.5 mm in height SATA I/II/III |
| Βάρος αποστολής | 0.09 kg |
| Διαστάσεις συσκευασίας | 142 × 107 × 36 mm |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.
You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.
The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;