Thermaltake
Thermaltake CL-F212-PL14SW-A case fan 140mm 3-pack ARGB PWM 500-2000 RPM
Three 140 mm PWM fans deliver up to 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A
- Fan Counts3 Fans
- TypeCase Fan
- Fan Size140mm
- Fan Thickness25mm
- Bearing TypeHydraulic Bearing
- RPMPWM 500 ~ 2000 R.P.M
- Three fans deliver 94.43 CFM each for strong system airflow
- Hydraulic bearing keeps noise to 35.3 dB-A at full speed
- PWM 500-2000 RPM range balances silence and cooling performance
- 5V 3-pin ARGB sync works with motherboard lighting software
- MagForce 2.0 magnetic mounting simplifies installation and repositioning
Three-fan kit for 140 mm mounts
This pack contains three 140 mm case fans designed for standard 140 mm mounting points. Each unit runs on a 4-pin PWM connector and a separate 5 V 3-pin ARGB header. The hydraulic bearing and liquid-crystal-polymer blades target builders who want addressable lighting and adjustable speed in a single package.
PWM range and ARGB header limit control
Speed is managed by the motherboard across a 500–2000 RPM range, so the lowest speeds depend on the board’s minimum PWM duty cycle. Lighting synchronisation requires a 5 V 3-pin ARGB header; systems without that header cannot control the LEDs. One fan delivers 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A.
MagForce 2.0 mounting and frame glow
MagForce 2.0 uses enlarged pogo-pin contacts to simplify fan-to-fan attachment without screws. The translucent side frames add a diffused glow that extends lighting beyond the front and rear surfaces. Black 25 mm-thick frames fit typical 140 mm fan locations in air-cooling or radiator setups.
Βασικά χαρακτηριστικά
- Three fans deliver 94.43 CFM each for strong system airflow
- Hydraulic bearing keeps noise to 35.3 dB-A at full speed
- PWM 500-2000 RPM range balances silence and cooling performance
- 5V 3-pin ARGB sync works with motherboard lighting software
- MagForce 2.0 magnetic mounting simplifies installation and repositioning
Προδιαγραφές
| Brand | Thermaltake |
|---|---|
| Model | CL-F212-PL14SW-A |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | PWM 500 ~ 2000 R.P.M |
| Air Flow | 94.43 CFM (one fan) |
| Noise Level | 35.3 dB-A (one fan) |
| Power Connector | 2510 – 4 Pin 5V ARGB header-3 Pin |
| Color | Black |
| LED | ARGB |
| Βάρος αποστολής | 1.00 kg |
| Διαστάσεις συσκευασίας | 169 × 155 × 89 mm |
Ερωτήσεις για αυτό το προϊόν
Should I pick the 3-pack or buy single fans to fill my 140 mm mounts?
The 3-pack gives you three identical 140 mm fans in one box, each rated at 94.43 CFM and 3.04 mm-H₂O, so you can populate three mounts with matched airflow and ARGB sync right away.
What does 94.43 CFM actually deliver inside a case?
At full 2000 RPM a single fan moves 94.43 CFM, providing strong airflow for radiators or mesh panels while the hydraulic bearing keeps noise around 35.3 dB-A.
Will the 5 V 3-pin ARGB header work with my motherboard's RGB software?
Yes, each fan includes a 5 V 3-pin ARGB connector that plugs into a standard motherboard 5 V header, letting you control colours and effects through the board's own lighting utility.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051772BTC
Διαθέσιμο