Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three black 140mm case fans with ARGB lighting rings and transparent blades, 25mm thick

Thermaltake

Thermaltake CL-F212-PL14SW-A case fan 140mm 3-pack ARGB PWM 500-2000 RPM

SKU CH-P8MZ-KBKQH MPN CL-F212-PL14SW-A

Three 140 mm PWM fans deliver up to 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • Three fans deliver 94.43 CFM each for strong system airflow
  • Hydraulic bearing keeps noise to 35.3 dB-A at full speed
  • PWM 500-2000 RPM range balances silence and cooling performance
  • 5V 3-pin ARGB sync works with motherboard lighting software
  • MagForce 2.0 magnetic mounting simplifies installation and repositioning

Three-fan kit for 140 mm mounts

This pack contains three 140 mm case fans designed for standard 140 mm mounting points. Each unit runs on a 4-pin PWM connector and a separate 5 V 3-pin ARGB header. The hydraulic bearing and liquid-crystal-polymer blades target builders who want addressable lighting and adjustable speed in a single package.

PWM range and ARGB header limit control

Speed is managed by the motherboard across a 500–2000 RPM range, so the lowest speeds depend on the board’s minimum PWM duty cycle. Lighting synchronisation requires a 5 V 3-pin ARGB header; systems without that header cannot control the LEDs. One fan delivers 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A.

MagForce 2.0 mounting and frame glow

MagForce 2.0 uses enlarged pogo-pin contacts to simplify fan-to-fan attachment without screws. The translucent side frames add a diffused glow that extends lighting beyond the front and rear surfaces. Black 25 mm-thick frames fit typical 140 mm fan locations in air-cooling or radiator setups.

Kohokohdat

  • Three fans deliver 94.43 CFM each for strong system airflow
  • Hydraulic bearing keeps noise to 35.3 dB-A at full speed
  • PWM 500-2000 RPM range balances silence and cooling performance
  • 5V 3-pin ARGB sync works with motherboard lighting software
  • MagForce 2.0 magnetic mounting simplifies installation and repositioning

Tekniset tiedot

BrandThermaltake
ModelCL-F212-PL14SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow94.43 CFM (one fan)
Noise Level35.3 dB-A (one fan)
Power Connector2510 – 4 Pin
5V ARGB header-3 Pin
ColorBlack
LEDARGB
Lähetyspaino1.00 kg
Pakkauksen mitat169 × 155 × 89 mm

Kysymyksiä tästä tuotteesta

Should I pick the 3-pack or buy single fans to fill my 140 mm mounts?

The 3-pack gives you three identical 140 mm fans in one box, each rated at 94.43 CFM and 3.04 mm-H₂O, so you can populate three mounts with matched airflow and ARGB sync right away.

What does 94.43 CFM actually deliver inside a case?

At full 2000 RPM a single fan moves 94.43 CFM, providing strong airflow for radiators or mesh panels while the hydraulic bearing keeps noise around 35.3 dB-A.

Will the 5 V 3-pin ARGB header work with my motherboard's RGB software?

Yes, each fan includes a 5 V 3-pin ARGB connector that plugs into a standard motherboard 5 V header, letting you control colours and effects through the board's own lighting utility.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.