Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Three black 140mm case fans with ARGB lighting rings and transparent blades, 25mm thick

Thermaltake

Thermaltake CL-F212-PL14SW-A case fan 140mm 3-pack ARGB PWM 500-2000 RPM

SKU CH-P8MZ-KBKQH MPN CL-F212-PL14SW-A

Three 140 mm PWM fans deliver up to 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • Three fans deliver 94.43 CFM each for strong system airflow
  • Hydraulic bearing keeps noise to 35.3 dB-A at full speed
  • PWM 500-2000 RPM range balances silence and cooling performance
  • 5V 3-pin ARGB sync works with motherboard lighting software
  • MagForce 2.0 magnetic mounting simplifies installation and repositioning

Three-fan kit for 140 mm mounts

This pack contains three 140 mm case fans designed for standard 140 mm mounting points. Each unit runs on a 4-pin PWM connector and a separate 5 V 3-pin ARGB header. The hydraulic bearing and liquid-crystal-polymer blades target builders who want addressable lighting and adjustable speed in a single package.

PWM range and ARGB header limit control

Speed is managed by the motherboard across a 500–2000 RPM range, so the lowest speeds depend on the board’s minimum PWM duty cycle. Lighting synchronisation requires a 5 V 3-pin ARGB header; systems without that header cannot control the LEDs. One fan delivers 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A.

MagForce 2.0 mounting and frame glow

MagForce 2.0 uses enlarged pogo-pin contacts to simplify fan-to-fan attachment without screws. The translucent side frames add a diffused glow that extends lighting beyond the front and rear surfaces. Black 25 mm-thick frames fit typical 140 mm fan locations in air-cooling or radiator setups.

Poudarki

  • Three fans deliver 94.43 CFM each for strong system airflow
  • Hydraulic bearing keeps noise to 35.3 dB-A at full speed
  • PWM 500-2000 RPM range balances silence and cooling performance
  • 5V 3-pin ARGB sync works with motherboard lighting software
  • MagForce 2.0 magnetic mounting simplifies installation and repositioning

Specifikacije

BrandThermaltake
ModelCL-F212-PL14SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow94.43 CFM (one fan)
Noise Level35.3 dB-A (one fan)
Power Connector2510 – 4 Pin
5V ARGB header-3 Pin
ColorBlack
LEDARGB
Teža pošiljke1.00 kg
Velikost pošiljke169 × 155 × 89 mm

Vprašanja o tem izdelku

Should I pick the 3-pack or buy single fans to fill my 140 mm mounts?

The 3-pack gives you three identical 140 mm fans in one box, each rated at 94.43 CFM and 3.04 mm-H₂O, so you can populate three mounts with matched airflow and ARGB sync right away.

What does 94.43 CFM actually deliver inside a case?

At full 2000 RPM a single fan moves 94.43 CFM, providing strong airflow for radiators or mesh panels while the hydraulic bearing keeps noise around 35.3 dB-A.

Will the 5 V 3-pin ARGB header work with my motherboard's RGB software?

Yes, each fan includes a 5 V 3-pin ARGB connector that plugs into a standard motherboard 5 V header, letting you control colours and effects through the board's own lighting utility.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.