Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three black 140mm case fans with ARGB lighting rings and transparent blades, 25mm thick

Thermaltake

Thermaltake CL-F212-PL14SW-A case fan 140mm 3-pack ARGB PWM 500-2000 RPM

SKU CH-P8MZ-KBKQH MPN CL-F212-PL14SW-A

Three 140 mm PWM fans deliver up to 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • Three fans deliver 94.43 CFM each for strong system airflow
  • Hydraulic bearing keeps noise to 35.3 dB-A at full speed
  • PWM 500-2000 RPM range balances silence and cooling performance
  • 5V 3-pin ARGB sync works with motherboard lighting software
  • MagForce 2.0 magnetic mounting simplifies installation and repositioning

Three-fan kit for 140 mm mounts

This pack contains three 140 mm case fans designed for standard 140 mm mounting points. Each unit runs on a 4-pin PWM connector and a separate 5 V 3-pin ARGB header. The hydraulic bearing and liquid-crystal-polymer blades target builders who want addressable lighting and adjustable speed in a single package.

PWM range and ARGB header limit control

Speed is managed by the motherboard across a 500–2000 RPM range, so the lowest speeds depend on the board’s minimum PWM duty cycle. Lighting synchronisation requires a 5 V 3-pin ARGB header; systems without that header cannot control the LEDs. One fan delivers 94.43 CFM airflow and 3.04 mm-H₂O static pressure at 35.3 dB-A.

MagForce 2.0 mounting and frame glow

MagForce 2.0 uses enlarged pogo-pin contacts to simplify fan-to-fan attachment without screws. The translucent side frames add a diffused glow that extends lighting beyond the front and rear surfaces. Black 25 mm-thick frames fit typical 140 mm fan locations in air-cooling or radiator setups.

Privalumai

  • Three fans deliver 94.43 CFM each for strong system airflow
  • Hydraulic bearing keeps noise to 35.3 dB-A at full speed
  • PWM 500-2000 RPM range balances silence and cooling performance
  • 5V 3-pin ARGB sync works with motherboard lighting software
  • MagForce 2.0 magnetic mounting simplifies installation and repositioning

Specifikacijos

BrandThermaltake
ModelCL-F212-PL14SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow94.43 CFM (one fan)
Noise Level35.3 dB-A (one fan)
Power Connector2510 – 4 Pin
5V ARGB header-3 Pin
ColorBlack
LEDARGB
Siuntos svoris1.00 kg
Pakuotės dydis169 × 155 × 89 mm

Klausimai apie šią prekę

Should I pick the 3-pack or buy single fans to fill my 140 mm mounts?

The 3-pack gives you three identical 140 mm fans in one box, each rated at 94.43 CFM and 3.04 mm-H₂O, so you can populate three mounts with matched airflow and ARGB sync right away.

What does 94.43 CFM actually deliver inside a case?

At full 2000 RPM a single fan moves 94.43 CFM, providing strong airflow for radiators or mesh panels while the hydraulic bearing keeps noise around 35.3 dB-A.

Will the 5 V 3-pin ARGB header work with my motherboard's RGB software?

Yes, each fan includes a 5 V 3-pin ARGB connector that plugs into a standard motherboard 5 V header, letting you control colours and effects through the board's own lighting utility.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.