Thermaltake
Thermaltake Riing Quad 140mm 54 LED PWM Case Fan CL-F089-PL14SW-C
- 1 Fan
- No Controller
25,99 $
0.00033169BTC
Διαθέσιμο
Thermaltake
Thermaltake Riing Quad CL-F089-PL14SW-B 140mm case fan 3 pack
Three 140 mm hydraulic-bearing fans with 54 RGB LEDs across four light rings deliver up to 60.17 CFM at 26.1 dBA
- Fan Counts3 Fans
- Fan ControllerController
- TypeCase Fan
- Fan Size140mm
- Fan Thickness25mm
- Bearing TypeHydraulic Bearing
Option 3 Packs w/ Controller
- Single Pack
- 3 Packs w/ Controller
- Quiet cooling from 26.1 dBA hydraulic bearing
- 17 CFM airflow at 1400 RPM maximum speed
- 54 RGB LEDs across four front light rings
- Three 140mm fans included with dedicated controller
- USB 2.0 9-pin connector for simple motherboard hookup
Thermaltake Riing Quad 140mm 3 Pack
The Thermaltake Riing Quad CL-F089-PL14SW-B is a kit of three 140mm case fans designed for radiator or chassis cooling. Each unit features a 25mm thick frame with hydraulic bearings and addressable RGB lighting across four rings totalling 54 LEDs per fan. A dedicated controller connects via USB 2.0 9-pin headers for software management.
Suits RGB builders with controller headers
These fans suit builders wanting synchronised RGB lighting across three 140mm positions using the included controller. They are not for systems lacking a USB 2.0 9-pin header or builders who prefer PWM 4-pin motherboard control without extra hardware. Buyers needing higher static pressure or silence above 1400 RPM should look elsewhere.
USB 2.0 9-pin controller requirement
The kit relies on a proprietary controller that connects to a USB 2.0 9-pin header on the motherboard. Without this specific internal header the lighting and speed control cannot function. Verify your board has an available USB 2.0 9-pin connector before purchase.
Βασικά χαρακτηριστικά
- Quiet cooling from 26.1 dBA hydraulic bearing
- 17 CFM airflow at 1400 RPM maximum speed
- 54 RGB LEDs across four front light rings
- Three 140mm fans included with dedicated controller
- USB 2.0 9-pin connector for simple motherboard hookup
Προδιαγραφές
| Brand | Thermaltake |
|---|---|
| Series | Riing Quad |
| Model | CL-F089-PL14SW-B |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 500 - 1400 R.P.M |
| Air Flow | 60.17 CFM (Max) |
| Noise Level | 26.1 dBA |
| Power Connector | USB 2.0 connectors (9 Pin) |
| Color | Black |
| LED | RGB |
| Features | 4 light rings at the front 54 LEDs in total. Set up your spectacular lighting. Hydraulic bearing with low-noise design. |
| Dimensions | 140 x 140 x 25 mm |
| Βάρος αποστολής | 1.11 kg |
| Διαστάσεις συσκευασίας | 201 × 188 × 97 mm |
Άλλες εκδόσεις αυτού του μοντέλου
1 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Ερωτήσεις για αυτό το προϊόν
Does my motherboard need a USB 2.0 9-pin header to power the Riing Quad controller?
Yes, the included controller connects to a USB 2.0 9-pin header on the motherboard to power all three 140 mm fans and their 54 RGB LEDs.
Will the 25 mm thick 140 mm fans clear my existing CPU cooler or radiator brackets?
Each fan measures 140 x 140 x 25 mm, so verify your cooler or radiator has at least 25 mm clearance per fan position before installing the trio.
How can I confirm the hydraulic bearings are running within the 500–1400 RPM range after installation?
Use BIOS or fan-control software to monitor each fan's speed; they should report between 500 and 1400 RPM under load while staying near 26.1 dBA at typical speeds.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001046BTC
Διαθέσιμο