Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Thermaltake

Thermaltake Riing Quad CL-F089-PL14SW-B 140mm case fan 3 pack

SKU CH-GA8N-073CW MPN CL-F089-PL14SW-B

Three 140 mm hydraulic-bearing fans with 54 RGB LEDs across four light rings deliver up to 60.17 CFM at 26.1 dBA

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Option 3 Packs w/ Controller

  • Quiet cooling from 26.1 dBA hydraulic bearing
  • 17 CFM airflow at 1400 RPM maximum speed
  • 54 RGB LEDs across four front light rings
  • Three 140mm fans included with dedicated controller
  • USB 2.0 9-pin connector for simple motherboard hookup

Thermaltake Riing Quad 140mm 3 Pack

The Thermaltake Riing Quad CL-F089-PL14SW-B is a kit of three 140mm case fans designed for radiator or chassis cooling. Each unit features a 25mm thick frame with hydraulic bearings and addressable RGB lighting across four rings totalling 54 LEDs per fan. A dedicated controller connects via USB 2.0 9-pin headers for software management.

Suits RGB builders with controller headers

These fans suit builders wanting synchronised RGB lighting across three 140mm positions using the included controller. They are not for systems lacking a USB 2.0 9-pin header or builders who prefer PWM 4-pin motherboard control without extra hardware. Buyers needing higher static pressure or silence above 1400 RPM should look elsewhere.

USB 2.0 9-pin controller requirement

The kit relies on a proprietary controller that connects to a USB 2.0 9-pin header on the motherboard. Without this specific internal header the lighting and speed control cannot function. Verify your board has an available USB 2.0 9-pin connector before purchase.

Přednosti

  • Quiet cooling from 26.1 dBA hydraulic bearing
  • 17 CFM airflow at 1400 RPM maximum speed
  • 54 RGB LEDs across four front light rings
  • Three 140mm fans included with dedicated controller
  • USB 2.0 9-pin connector for simple motherboard hookup

Specifikace

BrandThermaltake
SeriesRiing Quad
ModelCL-F089-PL14SW-B
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM500 - 1400 R.P.M
Air Flow60.17 CFM (Max)
Noise Level26.1 dBA
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
Features4 light rings at the front 54 LEDs in total.
Set up your spectacular lighting.
Hydraulic bearing with low-noise design.
Dimensions140 x 140 x 25 mm
Přepravní hmotnost1.11 kg
Rozměry balení201 × 188 × 97 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does my motherboard need a USB 2.0 9-pin header to power the Riing Quad controller?

Yes, the included controller connects to a USB 2.0 9-pin header on the motherboard to power all three 140 mm fans and their 54 RGB LEDs.

Will the 25 mm thick 140 mm fans clear my existing CPU cooler or radiator brackets?

Each fan measures 140 x 140 x 25 mm, so verify your cooler or radiator has at least 25 mm clearance per fan position before installing the trio.

How can I confirm the hydraulic bearings are running within the 500–1400 RPM range after installation?

Use BIOS or fan-control software to monitor each fan's speed; they should report between 500 and 1400 RPM under load while staying near 26.1 dBA at typical speeds.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.