Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión

Thermaltake

Thermaltake Riing Quad CL-F089-PL14SW-B 140mm case fan 3 pack

SKU CH-GA8N-073CW MPN CL-F089-PL14SW-B

Three 140 mm hydraulic-bearing fans with 54 RGB LEDs across four light rings deliver up to 60.17 CFM at 26.1 dBA

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Option 3 Packs w/ Controller

  • Quiet cooling from 26.1 dBA hydraulic bearing
  • 17 CFM airflow at 1400 RPM maximum speed
  • 54 RGB LEDs across four front light rings
  • Three 140mm fans included with dedicated controller
  • USB 2.0 9-pin connector for simple motherboard hookup

Thermaltake Riing Quad 140mm 3 Pack

The Thermaltake Riing Quad CL-F089-PL14SW-B is a kit of three 140mm case fans designed for radiator or chassis cooling. Each unit features a 25mm thick frame with hydraulic bearings and addressable RGB lighting across four rings totalling 54 LEDs per fan. A dedicated controller connects via USB 2.0 9-pin headers for software management.

Suits RGB builders with controller headers

These fans suit builders wanting synchronised RGB lighting across three 140mm positions using the included controller. They are not for systems lacking a USB 2.0 9-pin header or builders who prefer PWM 4-pin motherboard control without extra hardware. Buyers needing higher static pressure or silence above 1400 RPM should look elsewhere.

USB 2.0 9-pin controller requirement

The kit relies on a proprietary controller that connects to a USB 2.0 9-pin header on the motherboard. Without this specific internal header the lighting and speed control cannot function. Verify your board has an available USB 2.0 9-pin connector before purchase.

Puntos fuertes

  • Quiet cooling from 26.1 dBA hydraulic bearing
  • 17 CFM airflow at 1400 RPM maximum speed
  • 54 RGB LEDs across four front light rings
  • Three 140mm fans included with dedicated controller
  • USB 2.0 9-pin connector for simple motherboard hookup

Especificaciones

BrandThermaltake
SeriesRiing Quad
ModelCL-F089-PL14SW-B
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM500 - 1400 R.P.M
Air Flow60.17 CFM (Max)
Noise Level26.1 dBA
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
Features4 light rings at the front 54 LEDs in total.
Set up your spectacular lighting.
Hydraulic bearing with low-noise design.
Dimensions140 x 140 x 25 mm
Peso de envío1.11 kg
Dimensiones del paquete201 × 188 × 97 mm

Otras versiones de este modelo

1 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does my motherboard need a USB 2.0 9-pin header to power the Riing Quad controller?

Yes, the included controller connects to a USB 2.0 9-pin header on the motherboard to power all three 140 mm fans and their 54 RGB LEDs.

Will the 25 mm thick 140 mm fans clear my existing CPU cooler or radiator brackets?

Each fan measures 140 x 140 x 25 mm, so verify your cooler or radiator has at least 25 mm clearance per fan position before installing the trio.

How can I confirm the hydraulic bearings are running within the 500–1400 RPM range after installation?

Use BIOS or fan-control software to monitor each fan's speed; they should report between 500 and 1400 RPM under load while staying near 26.1 dBA at typical speeds.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.