نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Three black 140mm square case fans with four concentric RGB light rings each, 25mm thick, in a retail three-pack box

Thermaltake

Thermaltake Riing Quad CL-F089-PL14SW-B 140mm case fan 3 pack

SKU CH-GA8N-073CW MPN CL-F089-PL14SW-B

Three 140 mm hydraulic-bearing fans with 54 RGB LEDs across four light rings deliver up to 60.17 CFM at 26.1 dBA

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Option 3 Packs w/ Controller

  • Quiet cooling from 26.1 dBA hydraulic bearing
  • 17 CFM airflow at 1400 RPM maximum speed
  • 54 RGB LEDs across four front light rings
  • Three 140mm fans included with dedicated controller
  • USB 2.0 9-pin connector for simple motherboard hookup

Thermaltake Riing Quad 140mm 3 Pack

The Thermaltake Riing Quad CL-F089-PL14SW-B is a kit of three 140mm case fans designed for radiator or chassis cooling. Each unit features a 25mm thick frame with hydraulic bearings and addressable RGB lighting across four rings totalling 54 LEDs per fan. A dedicated controller connects via USB 2.0 9-pin headers for software management.

Suits RGB builders with controller headers

These fans suit builders wanting synchronised RGB lighting across three 140mm positions using the included controller. They are not for systems lacking a USB 2.0 9-pin header or builders who prefer PWM 4-pin motherboard control without extra hardware. Buyers needing higher static pressure or silence above 1400 RPM should look elsewhere.

USB 2.0 9-pin controller requirement

The kit relies on a proprietary controller that connects to a USB 2.0 9-pin header on the motherboard. Without this specific internal header the lighting and speed control cannot function. Verify your board has an available USB 2.0 9-pin connector before purchase.

أبرز المميزات

  • Quiet cooling from 26.1 dBA hydraulic bearing
  • 17 CFM airflow at 1400 RPM maximum speed
  • 54 RGB LEDs across four front light rings
  • Three 140mm fans included with dedicated controller
  • USB 2.0 9-pin connector for simple motherboard hookup

المواصفات

BrandThermaltake
SeriesRiing Quad
ModelCL-F089-PL14SW-B
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM500 - 1400 R.P.M
Air Flow60.17 CFM (Max)
Noise Level26.1 dBA
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
Features4 light rings at the front 54 LEDs in total.
Set up your spectacular lighting.
Hydraulic bearing with low-noise design.
Dimensions140 x 140 x 25 mm
وزن الشحنة1.11 kg
أبعاد الطرد201 × 188 × 97 mm

إصدارات أخرى من هذا الطراز

1 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does my motherboard need a USB 2.0 9-pin header to power the Riing Quad controller?

Yes, the included controller connects to a USB 2.0 9-pin header on the motherboard to power all three 140 mm fans and their 54 RGB LEDs.

Will the 25 mm thick 140 mm fans clear my existing CPU cooler or radiator brackets?

Each fan measures 140 x 140 x 25 mm, so verify your cooler or radiator has at least 25 mm clearance per fan position before installing the trio.

How can I confirm the hydraulic bearings are running within the 500–1400 RPM range after installation?

Use BIOS or fan-control software to monitor each fan's speed; they should report between 500 and 1400 RPM under load while staying near 26.1 dBA at typical speeds.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.